CLI Guide

export initiator-port register
Registers an initiator-port, associating it with a SCSI address.
Contexts
All contexts.
In /clusters/cluster/exports context, command is initiator-port register.
In /clusters/cluster/exports/initiator-ports context, command is register.
Syntax
export initiator-port register
[-c|--cluster] context-path
[-t|--type] {type}
[-i|--initiator-port] initiator-port
[-p|--port] port
Arguments
Required arguments
[-i|--initiator-
port] initiator-port
* Name to assign to the registered port. Name must be unique in the system. Command fails if the
specified name is already in use.
[-p|--port] port * Port identifier. For Fibre Channel initiators, a WWN pair as follows: portWWN|nodeWWN.
nodeWWN is optional. Each WWN is either '0x' followed by one or more hex digits, or an
abbreviation using the format: string:number[,number]. Following are four examples:
0xd1342a|0xd1342b
hyy1:194e,4|hyy1:194e
0xd1342a
hyy1:194e,4
Optional arguments
[-c|--cluster]
context-path
Cluster on which the initiator port is registered.
[-t|--type] {type} Type of initiator port. If no type is specified, the default value is used.
● hpux - Hewlett Packard UX
● sun-vcs - Sun Solaris
● aix - IBM AIX
● recoverpoint - Dell EMC RecoverPoint
● ibm-d910 - IBM Series D910
● default - If no type is specified.
* - argument is positional.
Description
Use the ll command in /clusters/cluster/directors/director/hardware /ports/port context to display
portWWNs and nodeWWNs.
Commands
171