CLI Guide

rebuild show-transfer-size
Shows the transfer-size of specified RAID 1 devices.
Contexts
All contexts.
Syntax
rebuild show-transfer-size
[-r|--devices] context-path
Arguments
Optional arguments
[-r|-devices] context-
path...
List of one or more RAID 1 devices for which to display the transfer size. Entries must be
separated by commas. Wildcards are permitted.
Example
Display the rebuild transfer size for a specified device:
VPlexcli:/> rebuild show-transfer-size TestDevice
device name transfer-size
------------- -------------
TestDevice 2M
Display rebuild transfer size for selected devices:
VPlexcli:/> rebuild show-transfer-size dd_0*
device name transfer-size
----------- -------------
dd_00 2M
dd_01 2M
dd_02 2M
.
.
.
Display rebuild transfer size for all distributed devices:
VPlexcli:/> rebuild show-transfer-size *
device name transfer-size
------------- -------------
TestDevice 2M
dd_00 2M
dd_01 2M
dd_02 2M
.
.
.
See also
● rebuild set-transfer-size
262
Commands