CLI Guide

Arguments
Optional arguments Description
[-h | --help]
Displays the usage for this command
[--verbose]
Provides additional output during command execution. This may not have
any effect for some commands.
[-n | --directors] context path , context
path ...
Source director(s) for which connectivity should be reported.
[-f | --file] filename Writes the connectivity report to the named file instead of echoing it. If
the file exists, any previous contents will be lost.
[-d | --show-directors]
Shows inter-director connectivity.
[-i | --show-initiators]
Shows connected initiators.
[-v | --show-storage-volumes]
Shows connected storage volumes.
[-t | --show-targets]
Shows connected targets.
[-s | --sort-by] key The field by which to sort the storage volume information (name, wwn or
port).
Description
Use this command to list the directors, initiators, storage volumes, and the targets that are connected to a director. Reports the
results of the connectivity list storage-volumes, connectivity list initiators, and the connectivity
list directors commands for each specified director. Unless you specify -d, -i, or -v, all three categories are reported.
The reports are ordered by director, not by report category.
See also
● connectivity list directors
● connectivity list initiators
● connectivity list storage-volumes
connectivity list directors
Displays the inter-director connections for a director.
Contexts
/: connectivity list directors
/clusters/*/directors/*/: list directors
Syntax
connectivity list directors
[-h| --help]
[--verbose]
[-n| --directors]context path, context path...
[-f| ] filename
82
Commands