Administrator Guide

Table 15. Director statistics (continued)
Statistic Type Description
director.fe-read
type: counter, units: bytes/second,
arguments: none
Front-end reads Number of bytes read from the director’s front-end
ports.
director.fe-write
type: counter, units: bytes/second,
arguments: none
Front-end writes Number of bytes written to the director’s front-end
ports.
director.heap-used
type: reading; units: percentage,
arguments: none
Memory Percentage of memory usage on the director.
director.per-cpu-busy
type: reading, units: percentage,
arguments: none
CPU busy The total utilization (user and system) of each CPU in
the director.
director.msg-send-ops number of operations The total number of messages sent from this director.
director.msg-max-lat Maximum latency The maximum latency of messages sent from this
director.
director.msg-min-lat Minimum latency The minimum latency of messages sent from this
director.
director.msg-avg-lat Average latency The agerage latency of messages sent from this
director.
Table 16. Front-end director (fe-director) statistics
Statistic Type Description
fe-director.aborts
type: counter, units: counts/second,
arguments: none
Front-end operations Number of aborted I/O operations through the director’s
front-end ports.
fe-director.caw-lat
type: bucket, units: microsecond,
arguments: none
CompareAndWrite
operations latency
CompareAndWrite latency in microseconds on the
specified director’s front-end ports. The latency bucket
is reduced to three buckets from 0 to maximum instead
of 64 latency buckets collected within the metro node
firmware.
fe-director.read-lat
type: bucket, units: microsecond,
arguments: none
Front-end director read
latency
Read latency distribution in microseconds on the
director’s front-end ports.
fe-director.write-lat
type: bucket, units: microsecond,
arguments: none
Front-end director write
latency
Write latency distribution in microseconds on the
director’s front-end ports.
fe-director.ws16-avg-lat
type: period-average, units: us,
arguments: none
Front-end director
writesame average
latency
Average WriteSame latency distribution on the director’s
front-end ports.
fe-director.unmap-ops
type: counter, units: counts/second,
arguments: none
Front-end director
unmap operations
Number of unmap operations per second on the specified
front-end director
fe-director.unmap-avg-lat Front-end director
average unmap latency
Average latency in microseconds of unmap operations at
the specified front-end director
100 Performance and Monitoring