Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
The idle timeout is based on the URL used to access the GUI. Therefore when you access the GUI on cluster 1 and set the idle
timeout, it will apply only to cluster 1. If you log into cluster 2, the idle timeout dialog will not have the same value as that of
cluster 1, because the URL is different.
The value of the timeout field can be an integer value between 1 and 12 if the field unit value is set to hours. The value of the
Timeout field can be an integer value between 1 and 720 if the field unit value is set to minutes.
NOTE: The value for Timeout is stored in a file named using the URL with which you accessed the GUI. If you access
the GUI for a cluster using different URLs (For example, using the DNS name of the cluster or using the IP address), the
timeout value for each URL used will be different.
Provision storage data reload policy
Select one of the following options to define how often data is reloaded when navigating through provisioning views.
● Always — Always reload data upon navigation to a storage object view. This is the default setting.
● Never — Never reload data upon navigation to a storage object view.
● After — The number of hours or minutes after which to reload data when you navigate to a storage object view. Enter a
number in the field and then select the time interval. Once you navigate to an object view, the data will automatically reload
at the specified time interval.
The data reload policy setting applies only to the URL and client used to access the GUI when you set the policy. Therefore, if
you log in to the GUI again using a different client (laptop versus desktop) or a different URL (cluster 1 versus cluster 2), the
reload policy setting will not be applied to that GUI session.
To manually refresh the data, click the Refresh icon
in the upper-right corner of the screen title bar or the Last Refreshed
link at the bottom of the screen.
Configuring GUI default settings
15