Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
None — ALUA is not supported on the array.
Connectivity
Status
The connectivity status of the logical unit.
Visibility Indicates how the logical unit is visible to the controllers. Possible values:
Active optimized — All commands and task management functions can be sent on this path; this path has the highest
performance (ALUA arrays only).
Active non-optimized — All commands and task management functions can be sent on this path, but the path has a
lower performance than an active optimized path (ALUA arrays only).
Active — The controller actively processing I/O requests.
Both — Both controllers process I/O and provide standby capability for each other. One controller is actively processing I/O
while the other is idle in standby mode waiting to process I/O should the active primary controller fail or be taken offline.
None — ALUA is not supported on the array.
ALUA Support field values
Value Definition
Implicit The logical unit can change its ALUA access state internally within
the array without any external input requesting a change.
Explicit The logical unit can change its ALUA access state in response to a
request from an initiator (metro node back-end software).
Implicit explicit The logical unit has both implicit and explicit capabilities.
None ALUA is not supported on the array.
Visibility field values
Value
Definition
Active optimized All commands and task management functions can be sent on this path; this path
has the highest performance (ALUA arrays only).
Active non-optimized All commands and task management functions can be sent on this path, but the
path has a lower performance than an active optimized path (ALUA arrays only).
Active The controller is actively processing I/O requests.
Passive The controller is in standby mode waiting to process I/O should the active primary
controller fail or be taken offline.
Both Both controllers process I/O and provide standby capability for each other. One
controller is actively processing I/O while the other is idle in standby mode waiting
to process I/O should the active primary controller fail or be taken offline.
None ALUA is not supported on the array.
Extent or Device mobility job properties
Mobility Job
Name
The name of the mobility job.
Source The name of the source extent or source device.
Target The name of the target extent or target device.
168 Help