Microsoft Windows Server 2008 R2 for Dell PowerEdge Systems Installing Microsoft Windows Server 2008 R2
Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ____________________ Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Contents Introduction Overview . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . . . . . . . . . . . . . . . 5 Completing Setup of the Preinstalled Microsoft Windows Server 2008 R2 Operating System . . . . . . . 5 . . . . . . 7 . . . . . . . . . . . . 7 Installing Microsoft Windows Server 2008 R2 Pre-Installation Requirements Installing Microsoft Windows Server 2008 R2 Using Dell Unified Server Configurator (USC) . . . . . .
Contents
Introduction This document provides information on Microsoft Windows Server 2008 R2 for Dell PowerEdge systems. The document also includes information on Windows Server 2008 R2 Service Pack 1 (SP1). NOTE: Unless stated otherwise, the information in this document applies to all service packs of the operating system.
4 Select the I accept the license terms option and click Start to start the installation if you have read the license agreements and accept the terms. NOTE: Before using your system, read the software license agreements that are included with each program that you ordered. NOTE: You cannot proceed with the installation if you do not choose the I accept the license terms option. 5 The system prompts you to change the administrator password before logging in for the first time.
Installing Microsoft Windows Server 2008 R2 Use one of the following methods to install Microsoft Windows Server 2008 R2: • "Installing Microsoft Windows Server 2008 R2 Using Dell Unified Server Configurator (USC)" on page 8 • "Installing Microsoft Windows Server 2008 R2 Using the Dell Systems Management Tools and Documentation Media" on page 10 • "Installing Microsoft Windows Server 2008 R2 Using the Operating System Media" on page 14 CAUTION: The following installation procedure erases all data on yo
Installing Microsoft Windows Server 2008 R2 Using Dell Unified Server Configurator (USC) NOTE: Dell USC support is available only from the latest generation server onwards. Ensure that your server has this support. To install Microsoft Windows Server 2008 R2 using Dell USC: 1 Connect the keyboard, monitor, mouse, and any additional peripherals to your system. 2 Turn on the system and the attached peripherals. 3 Press in the POST to start the System Services. The Initializing UEFI. Please wait...
If a Windows operating system is installed on your system, the following message is displayed: Press any key to boot from the CD/DVD ...Press any key to begin the installation. 12 In the Install Windows screen, select the appropriate option for Language, Time and Currency Format, and Keyboard or Input Method. 13 Click Next to continue. 14 In the Windows Server 2008 R2 screen, click Install Now. The Operating System Install screen is displayed.
d Select the newly-created operating system partition and click Next. The Installing Windows screen is displayed and the installation process begins. After the operating system is installed the system reboots. You must set the administrator password before you can log in for the first time. 19 Click OK in the The user’s password must be set before you login for the first time screen. 20 In the Administrator screen, enter the password, confirm the password, and click the right-arrow.
You must configure the system to boot from the optical drive. To install the operating system using the Dell Systems Management Tools and Documentation media: 1 Connect the keyboard, monitor, mouse, and any additional peripherals to your system. 2 Turn on the system and the attached peripherals. 3 Insert the Dell Systems Management Tools and Documentation media into the optical drive. 4 Press when you are prompted to run the setup utility. The BIOS Settings screen is displayed.
Select Retain existing configuration on the system. If RAID is not yet configured, configure it at this time and click Continue. The Operating System Installation Summary screen is displayed, with the installation options that you have selected. 13 Click Back to change the installation options. If the options displayed are accurate, click Apply Now. The operating system installation begins.
To create a partition and begin installation: a Click New. b Specify the size of the partition in MB, and click Apply. A Windows might create additional partition for system files message is displayed. c Press OK. NOTE: The recommended minimum partition size for the Primary partition is 40 GB. If you are installing additional memory on your system, you may require additional primary partition space to accommodate page file and hibernation.
Installing Microsoft Windows Server 2008 R2 Using the Operating System Media Before you install Microsoft Windows Server 2008 using the Operating System media, you must create a device driver media, download the DRAC diskette image, or create a USB drive driver disk.
5 Alternatively, click Select Model, and navigate to the specific model. 6 Select the System Type, Operating System, Driver Language, Category, and Importance from the drop-down list. 7 The drivers that are applicable to your selection are displayed. From the available list, download the drivers that you require to a diskette drive, USB drive, CD, or DVD.
2 Turn on your system and any attached peripherals. Several BIOS screens appear during startup, but do not require any user intervention. NOTE: This method of installation is supported in the BIOS and UEFI modes. 3 Insert the Microsoft Windows Server 2008 R2 media into the DVD drive. NOTE: If a Windows operating system is installed on your system, the following message is displayed: Press any key to boot from the CD/DVD ... Press any key to begin the installation.
To create a partition and begin installation: a Click New. b Specify the size of the partition in MB, and click Apply. A Windows might create additional partition for system files message is displayed. c Press OK. NOTE: The recommended minimum partition size for the Primary partition is 40 GB. If you are installing additional memory on your system, you may require additional primary partition space to accommodate page file and hibernation.
Initial Configuration Tasks and Server Manager After you log in, the Initial Configuration Tasks screen is displayed. You can perform various tasks to provide system information, update the system, and customize the system. After you close the Initial Configuration Tasks window, the Server Manager screen is displayed.
GUID Partition Table Scheme GUID partition table (GPT) scheme is a new standard for the layout of the partition table on a physical hard drive. It is part of the extensible firmware interface (EFI) standard, which is a replacement for the system BIOS. Table 3 provides information about the basic level of support provided by each of these partition schemes. Table 3.
NOTE: It is recommended that you use the GPT partition scheme as it is more flexible, supports larger hard drive sizes, and has a number of features and recovery mechanisms that are not available in the MBR partition scheme. For more information on partitions and volumes, see partitions and volumes on technet.microsoft.com. For more information on GPT, see the Windows and GPT frequently asked questions on microsoft.com. NOTE: GPT boot (UEFI boot) is supported only on 11G or newer platforms.
body.
适用于 Dell PowerEdge 系统 的 Microsoft Windows Server 2008 R2 安装 Microsoft Windows Server 2008 R2
注和小心 注: “注”表示可以帮助您更好地使用计算机的重要信息。 小心: “小心”表示如果不遵循说明,就有可能损坏硬件或导致数据丢失。 ____________________ 本出版物中的信息如有更改,恕不另行通知。 © 2011 Dell Inc. 版权所有,翻印必究。 未经 Dell Inc. 书面许可,严禁以任何形式复制这些材料。 本文中使用的商标:Dell™、 DELL 徽标、 OpenManage™ 和 PowerEdge™ 是 Dell Inc. 的商 标。 Microsoft®、 Windows® 和 Windows Server® 是 Microsoft Corporation 在美国和/或其他国 家/地区的商标或注册商标。 本出版物中可能使用其它商标和产品名称提及拥有相应商标和产品名称的实体或其制造的产 品。 Dell Inc. 对其它公司的商标和产品名称不拥有任何所有权。 2011 年 1 月 Rev.
目录 简介 . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 概览 . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 完成预装的 Microsoft Windows Server 2008 R2 操作系统的设置 . . . . . . . . . . . . . . . . 安装 Microsoft Windows Server 2008 R2 . 预安装要求 25 . . . . . . . 27 . . . . . . . . . . . . . . . . . . . . 27 使用 Dell Unified Server Configurator (USC) 安装 Microsoft Windows Server 2008 R2 . . . . . . . . 28 . . . . . . 30 . . . . . . . . . . 34 . . . . . . . . . . . . . 34 . . . . . . . .
24 目录
简介 本说明文件提供有关适用于 Dell PowerEdge 系统的 Microsoft Windows Server 2008 R2 的信息。本说明文件还包括有关 Windows Server 2008 R2 Service Pack 1 (SP1) 的信息。 注:除非另有说明,本说明文件中的信息适用于该操作系统的所有 Service Pack。 概览 本文档提供以下相关信息: • 安装 Microsoft Windows Server 操作系统 • 驱动器分区 完成预装的 Microsoft Windows Server 2008 R2 操作系统的设置 注:如果 Windows Server 2008 R2 SP1 已集成到您的安装介质中,请按照本 说明文件中的说明进行操作。如果没有,则先安装 Windows Server 2008 R2 操作系统,安装后再从 Windows Update 下载更新,应用 Service Pack。 本节提供在预装了 Windows Server 2008 R2 操作系统的系统上完成操作系 统设置所需的步骤。 注:开始之前,请阅读操作系统附带的说明文件,了解产品
4 如果您已阅读许可协议并接受条款,请选择 I accept the license terms (我接受许可条款)选项并单击 Start (开始)以开始安装。 注:在使用系统之前,请阅读您订购的每个程序所附带的软件许可协议。 注:如果不选择 I accept the license terms (我接受许可条款)选项,便 无法继续安装。 5 系统会在初次登录前提示您更改管理员密码。单击 OK (确定)并输 入管理员密码。 6 单击右箭头。 此时显示 Password Change Confirmation (密码更改确认)屏幕。 7 单击 OK (确定)。 注:密码必须符合密码复杂性规则。有关密码复杂性规则的详情,请 参阅操作系统说明文件。 注:完成此过程可能需要几分钟。 此时显示 Initial Configuration Tasks (初始配置任务)窗口,然后显 示 Server Manager (服务器管理器)窗口。 Windows Server 2008 R2 操作系统已经安装到您的系统上。 有关完成安装的其它信息,请参阅软件随附的说明文件或访问 support.microsoft.
安装 Microsoft Windows Server 2008 R2 使用下列方法之一安装 Microsoft Windows Server 2008 R2: • 第 28 页上的 “使用 Dell Unified Server Configurator (USC) 安装 Microsoft Windows Server 2008 R2” • 第 30 页上的 “使用 Dell Systems Management Tools and Documentation 介质安装 Microsoft Windows Server 2008 R2” • 第 34 页上的 “使用操作系统介质安装 Microsoft Windows Server 2008 R2” 小心:以下安装过程会删除硬盘驱动器上的所有数据。建议您在开始安装之 前备份所有重要的数据。 注:如果您购买的 Dell 系统不含操作系统,强烈建议您使用受支持的 Dell Systems Management Tools and Documentation 介质版本来指导您完成操作系统 的安装过程。 注:如果使用操作系统介质来安装操作系统,则必须安装
使用 Dell Unified Server Configurator (USC) 安装 Microsoft Windows Server 2008 R2 注:Dell USC 支持仅从最新一代服务器之后开始提供。确认您的服务器具有 此项支持功能。 要使用 Dell USC 安装 Microsoft Windows Server 2008 R2,请执行以下 步骤: 1 将键盘、显示器、鼠标和所有其它外围设备连接至系统。 2 打开系统和连接的外围设备电源。 3 在 POST 中按 以启动 System Services (系统服务)。 将会显示 Initializing UEFI.Please wait... (正在初始化 UEFI, 请稍候...)和 Entering System Services... Starting Unified Server Configurator (正在进入系统服务...
11 在 Reboot the System (重新引导系统)屏幕中,按照屏幕上的说明操 作,然后单击 Finish (完成)。 如果系统上已安装 Windows 操作系统,则会显示以下信息:Press any key to boot from the CD/DVD ...Press any key to begin the installation (按任意键从 CD/DVD 引导...
d 选择新创建的操作系统分区,然后单击 Next (下一步)。 系统将会显示 Installing Windows (安装 Windows)屏幕并开始安装 过程。 操作系统安装完毕后,系统将重新引导。首次登录以前必须先设置管 理员密码。 19 在 The user’s password must be set before you login for the first time (首次登录以前必须先设置用户密码)屏幕中,单击 OK (确定)。 20 在 Administrator (管理员)屏幕中,输入并确认密码,然后单击右箭 头键。 系统将显示以下信息: Your password has been changed (密码已更改)。 21 单击 OK (确定)。 首次登录时,将会显示 Preparing Your Desktop (正在准备桌面)窗 口。操作系统安装现已完毕。 使用 Dell Systems Management Tools and Documentation 介质安装 Microsoft Windows Server 2008 R2 注:Dell OpenManage 6.
您必须将系统配置为从光盘驱动器引导。要使用 Dell Systems Management Tools and Documentation 介质安装操作系统,请执行以下步骤: 1 将键盘、显示器、鼠标和所有其它外围设备连接至系统。 2 打开系统和连接的外围设备电源。 3 将 Dell Systems Management Tools and Documentation 介质插入到光盘 驱动器中。 4 出现提示时,按 以运行设置公用程序。 将会显示 BIOS Settings (BIOS 设置)屏幕。 5 使用箭头键,滚动至 Boot Sequence (引导顺序)字段并按 。 6 将 CD ROM 驱动器配置为第一个引导选项,然后按 退出 BIOS Setting (BIOS 设置)屏幕。 现在,系统已准备好从光盘驱动器 引导。 Dell Systems Management Tools and Documentation 介质菜单启动时会 附带几个选项。 7 选择 Dell Systems Build and Update Utility。 系统即会从所选的选项引导,并且
12 选择 Retain existing configuration on the system (保留系统上的现有 配置)。如果尚未配置 RAID,请此时进行配置,然后单击 Continue (继续)。 系统将显示 Operating System Installation Summary (操作系统安装摘 要)屏幕,其中包含您已经选择的安装选项。 13 单击 Back (上一步)可更改安装选项。如果显示的选项正确无误,请 单击 Apply Now (立即应用)。 操作系统开始安装。 小心:所有安装设置完成后, Dell Systems Build and Update Utility 屏幕会提示 您取出介质。取出 Dell Systems Management Tools and Documentation 介质。 系统会重新引导至本地硬盘驱动器,然后提示插入 Windows 安装介质。请 不要在此阶段直接引导至光盘驱动器。 14 在光盘驱动器中插入 Windows 安装介质并单击 OK (确定)。 15 安装过程中,系统可能会显示一些信息。按 OK (确定)以继续安装。 小心:将擦除本地硬盘驱动器上的
创建分区并开始安装: a 单击 New (新建)。 b 指定分区大小 (MB),然后单击 Apply (应用)。 此时将会显示 Windows might create additional partition for system files (Windows 可能会为系统文件创建其它分区)消息。 c 按 OK (确定)。 注:主分区的建议最小分区大小为 40 GB。如果要在系统上安装附 加内存,可能需要额外的主分区空间来容纳页面文件和配合休 眠。安装期间,屏幕上会根据系统的内存大小显示建议的分区大 小。按照屏幕上的说明进行操作。如果选择 Core installation (核 心安装),需要的主分区硬盘空间会少一些。有关驱动器分区的 信息,请参阅第 38 页上的 “对驱动器进行分区”。 d 选择新创建的操作系统分区,然后单击 Next (下一步)。 22 系统将会显示 Installing Windows (安装 Windows)屏幕并开始安装 过程。 23 操作系统安装完毕后,系统将重新引导。首次登录以前必须先设置管 理员密码。 24 在 The user’s password mus
使用操作系统介质安装 Microsoft Windows Server 2008 R2 在使用操作系统介质安装 Microsoft Windows Server 2008 之前,必须创建 设备驱动程序介质、下载 DRAC 软盘映像,或者创建 USB 驱动器驱动程 序磁盘。 创建设备驱动程序介质 使用以下各节中所述的方法之一来创建设备驱动程序介质: 从 Dell Systems Management Tools and Documentation 介质下载驱动程序 1 将 Dell Systems Management Tools and Documentation 介质插入到系 统中。 随即显示 Welcome to Dell Service and Diagnostic Utilities (欢迎使用 Dell 服务和诊断公用程序)屏幕。 2 选择您的服务器型号和操作系统 (Microsoft Windows Server 2008 R2)。 3 单击 Continue (继续)。 4 从显示的驱动程序列表中选择需要的驱动程序。选择自解压 zip 文件, 然后单击 Run (运行)。 将驱动程序复制到软
6 从下拉式列表中选择 System Type (系统类型)、 Operating System (操作系统)、 Driver Language (驱动程序语言)、 Category (类 别)和 Importance (重要性)。 7 符合所选内容的驱动程序将显示出来。从可用列表将所需的驱动程序 下载到软盘驱动器、 USB 驱动器、 CD 或 DVD。 8 如第 34 页上的 “使用操作系统介质安装 Microsoft Windows Server 2008 R2”中所述,在操作系统安装期间,使用通过 Load Driver (载 入驱动程序)选项创建的介质,载入大容量存储设备驱动程序。 使用 DRAC 软盘映像 使用位于 Dell 支持网站 support.dell.
3 将 Microsoft Windows Server 2008 R2 介质插入 DVD 驱动器。 注:如果系统中已安装 Windows 操作系统,会显示以下信息:Press any key to boot from the CD/DVD ... (按任意键从 CD/DVD 引导 ...
创建分区并开始安装: a 单击 New (新建)。 b 指定分区大小 (MB),然后单击 Apply (应用)。 c 此时将会显示 Windows might create additional partition for system files (Windows 可能会为系统文件创建其它分区)消息。 按 OK (确定)。 注:主分区的建议最小分区大小为 40 GB。如果要在系统上安装附加内 存,可能需要额外的主分区空间来容纳页面文件和配合休眠。安装期 间,屏幕上会根据系统的内存大小显示建议的分区大小。按照屏幕上的 说明进行操作。如果选择Core installation (核心安装),需要的主分区 硬盘空间会少一些。有关驱动器分区的信息,请参阅第 38 页上的 “对 驱动器进行分区”。 选择新创建的操作系统分区,然后单击 Next (下一步)。 随即显示 Installing Windows (安装 Windows)屏幕,并显示安装进度。 d 注:安装过程需要花费一些时间才能完成。 11 操作系统安装完毕后,系统将重新引导。首次登录以前必须先设置管 理员密码。 12 在 The user’
初始配置任务和服务器管理器 登录后,会显示 Initial Configuration Tasks (初始配置任务)屏幕。您可 以执行多种任务来提供系统信息、更新系统以及自定义系统。 关闭 Initial Configuration Tasks (初始配置任务)窗口后, Server Manager (服务器管理器)屏幕会显示。使用 Server Manager (服务器管理器)执 行以下操作: • 查看或管理角色 • 查看功能 • 执行诊断程序 • 查看或修改配置 • 查看或管理存储 有关详情,请浏览 Microsoft 支持 Web 站点 support.microsoft.
表 3.
40 安装 Microsoft Windows Server 2008 R2
body.
book.
book.book Page 42 Sunday, January 30, 2011 4:38 PM 註和警示 註: 「註」表示可以幫助您更有效地使用電腦的重要資訊。 警示: 「警示」表示若沒有遵從指示,可能導致硬體損壞或資料遺失。 ____________________ 本出版品中的資訊如有變更,恕不另行通知。 © 2011 Dell Inc. 版權所有,翻印必究。 未經 Dell Inc. 的書面許可,嚴格禁止以任何形式複製這些內容。 本文中使用的商標:Dell™、DELL 標誌、OpenManage™ 與 PowerEdge™ 是 Dell Inc. 的商 標。Microsoft®、Windows® 與 Windows Server® 是 Microsoft Corporation 在美國及/或其他國 家/地區的商標或註冊商標。 本出版品中使用的其他商標及商品名稱,係指擁有這些商標及商品名稱的公司或其製造的產 品。Dell Inc.
book.book Page 43 Sunday, January 30, 2011 4:38 PM 目錄 簡介 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 概觀 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 完成預先安裝的 Microsoft Windows Server 2008 R2 作業系統之設定 . . . . . . . . . . . 安裝 Microsoft Windows Server 2008 R2 . . . . . . . 5 . . . . . . . . 7 預先安裝要求 . . . . . . . . . . . . . . . 7 使用 Dell Unified Server Configurator (USC) 安裝 Microsoft Windows Server 2008 R2 . . . . . . . . .
book.
book.
book.book Page 46 Sunday, January 30, 2011 4:38 PM 4 如果您已閱讀授權合約並接受其中的條款,請選擇我接受授權條款選 項,然後按一下開始以開始安裝。 註:在使用您的系統之前,請詳閱所訂購之每個程式隨附的軟體授權 合約。 註:如果不選擇我接受授權條款選項,將無法繼續安裝。 5 在您初次登入之前,系統會提示您變更管理員密碼。按一下確定,然 後輸入管理員密碼。 6 按一下向右鍵。 螢幕上會出現密碼變更確認畫面。 7 按一下確定。 註:密碼必須符合密碼複雜性規則。如需有關密碼複雜性規則的詳細 資訊,請參閱您的作業系統說明文件。 註:此程序可能需要數分鐘才能完成。 隨即會顯示初始設定工作視窗,然後顯示伺服器管理員視窗。 Windows Server 2008 R2 作業系統即已安裝到您的系統中。 如需完成安裝的其他資訊,請參閱軟體隨附的說明文件,或瀏覽 support.microsoft.
book.
book.book Page 48 Sunday, January 30, 2011 4:38 PM 使用 Dell Unified Server Configurator (USC) 安裝 Microsoft Windows Server 2008 R2 註:Dell USC 支援僅從最新一代伺服器開始提供。請確認您的伺服器包含此 支援。 使用 Dell USC 安裝 Microsoft Windows Server 2008 R2: 1 將鍵盤、顯示器、滑鼠和任何其他周邊裝置連接至系統。 2 開啟系統和連接的周邊裝置。 3 在 POST 中按 啟動 System Services (系統服務)。 螢幕上將會顯示 Initializing UEFI. Please wait... (正在初始化 UEFI,請 稍候...) 及 Entering System Services...Starting Unified Server Configurator (正在進入系統服務...
book.book Page 49 Sunday, January 30, 2011 4:38 PM 如果系統上已安裝 Windows 作業系統,將會出現下列訊息:Press any key to boot from the CD/DVD ...Press any key to begin the installation (按下任意鍵從 CD/DVD 啟動 ...
book.
book.
book.
book.
book.
book.book Page 55 Sunday, January 30, 2011 4:38 PM 6 依序從下拉式清單中選取 System Type (系統類型)、Operating System (作業系統)、Driver Language (驅動程式語言)、Category (類別) 和 Importance (重要性)。 7 隨即會顯示符合選取內容的驅動程式。請從可用的清單中,將所需的 驅動程式下載到磁碟機、USB 磁碟機、CD 或 DVD。 8 如同第 14 頁上的 「使用作業系統媒體安裝 Microsoft Windows Server 2008 R2」中所述,在作業系統安裝期間,可使用透過 Load Driver (載 入驅動程式) 選項建立的媒體,載入大量儲存裝置驅動程式。 使用 DRAC 磁片影像 使用位於 Dell Support (戴爾支援) 網站 support.dell.
book.book Page 56 Sunday, January 30, 2011 4:38 PM 3 將 Microsoft Windows Server 2008 R2 媒體插入 DVD 光碟機。 註:如果系統中已安裝 Windows 作業系統,則會出現下列訊息:Press any key to boot from the CD/DVD ... (按下任意鍵從 CD/DVD 啟動 ...
book.
book.book Page 58 Sunday, January 30, 2011 4:38 PM 初始設定工作和伺服器管理員 在您登入之後,Initial Configuration Tasks (初始設定工作) 畫面隨即出現。 您可執行多種工作以提供系統資訊、更新系統和自訂系統。 關閉 Initial Configuration Tasks (初始設定工作) 視窗後,將會顯示 Server Manager (伺服器管理員) 畫面。使用 Server Manager (伺服器管理員) 執行 下列操作: • 檢視或管理角色 • 檢視功能 • 執行診斷程式 • 檢視或修改組態 • 檢視或管理儲存 若需詳細資訊,請瀏覽 Microsoft 支援服務網站 support.microsoft.
book.book Page 59 Sunday, January 30, 2011 4:38 PM 表 3.
book.
body.
book.
book.book Page 2 Sunday, January 30, 2011 2:38 PM Remarques et précautions REMARQUE : une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. PRÉCAUTION : une PRÉCAUTION indique un risque d'endommagement du matériel ou de perte de données en cas de non-respect des instructions. ____________________ Les informations contenues dans ce document peuvent être modifiées sans préavis. © 2011 Dell Inc. Tous droits réservés.
book.book Page 63 Sunday, January 30, 2011 2:38 PM Sommaire Introduction . . . . . . . . . . . . . . . . . . . . . . . 65 Présentation . . . . . . . . . . . . . . . . . . . . . . . 65 Configuration du système d'exploitation Microsoft Windows Server 2008 R2 préinstallé . . . . Installation de Microsoft Windows Server 2008 R2 Tâches préalables à l'installation 65 . . . 67 . . . . . . . . .
book.book Page 64 Sunday, January 30, 2011 2:38 PM Partitionnement d'un disque dur . . . . . . . . . . . . 80 Modèle MBR . . . . . . . . . . . . . . . . . . . . 80 Modèle GPT . . . . . . . . . . . . . . . . . . . . . 80 Choix d'un modèle de partitionnement . 64 Sommaire . . . . . .
book.book Page 65 Sunday, January 30, 2011 2:38 PM Introduction Ce document fournit des informations sur Microsoft Windows Server 2008 R2 pour les systèmes Dell PowerEdge. Il contient également des informations sur Windows Server 2008 R2 Service Pack 1 (SP1). REMARQUE : sauf mention contraire, ces informations s'appliquent à tous les service packs du système d'exploitation.
book.book Page 66 Sunday, January 30, 2011 2:38 PM 4 Sélectionnez l'option J'accepte les termes du contrat de licence et cliquez sur Démarrer pour lancer l'installation, si vous avez lu et approuvé les termes du contrat. REMARQUE : avant d'utiliser le système, lisez la totalité des contrats de licence fournis avec chacun des programmes que vous avez commandés. REMARQUE : vous ne pouvez pas poursuivre l'installation sans avoir choisi l'option J'accepte les termes du contrat de licence.
book.
book.book Page 68 Sunday, January 30, 2011 2:38 PM • Créez un support contenant les pilotes de périphériques (disquette, lecteur USB, CD ou DVD). REMARQUE : cette opération est requise uniquement lorsque vous installez Microsoft Windows Server 2008 R2 à l'aide du CD du système d'exploitation. Installation de Microsoft Windows Server 2008 R2 à l'aide de l'utilitaire Dell Unified Server Configurator (USC) REMARQUE : l'utilitaire Dell USC est seulement pris en charge par les serveurs de dernière génération.
book.book Page 69 Sunday, January 30, 2011 2:38 PM 6 Sélectionnez Go directly to OS Deployment (Passer directement au déploiement du système d'exploitation). Si RAID n'est pas configuré, faites-le à ce stade. 7 Cliquez sur Next (Suivant). La fenêtre Select Operating System (Sélection du système d'exploitation) s'affiche et propose une liste de systèmes d'exploitation compatibles. 8 Sélectionnez Microsoft Windows Server 2008 R2, puis cliquez sur Next (Suivant).
book.book Page 70 Sunday, January 30, 2011 2:38 PM 17 Dans l'écran Quel type d'installation voulez-vous effectuer, sélectionnez l'option Personnalisée (option avancée), si elle ne l'est pas déjà. 18 Dans l'écran Où souhaitez-vous installer Windows, indiquez la partition sur laquelle vous souhaitez installer le système d'exploitation. Pour créer une partition et commencer l'installation : a Cliquez sur Nouveau. b Indiquez la taille de la partition en Mo et cliquez sur Appliquer.
book.book Page 71 Sunday, January 30, 2011 2:38 PM 21 Cliquez sur OK. À votre première ouverture de session, la fenêtre Préparation de votre Bureau s'affiche. L'installation du système d'exploitation est maintenant terminée. Installation de Microsoft Windows Server 2008 R2 à l'aide du CD Dell Systems Management Tools and Documentation REMARQUE : Dell OpenManage version 6.1 et les versions ultérieures permettent de déployer Microsoft Windows Server 2008 R2.
book.book Page 72 Sunday, January 30, 2011 2:38 PM 6 Configurez le lecteur de CD-ROM comme première unité d'amorçage, puis appuyez sur <Échap> pour quitter l'écran BIOS Settings (Paramètres du BIOS). Le système se prépare à démarrer à partir du lecteur optique . Le menu du support Dell Systems Management Tools and Documentation (Documentation et outils de gestion des systèmes Dell) présente plusieurs options.
book.book Page 73 Sunday, January 30, 2011 2:38 PM L'écran Operating System Installation Summary (Résumé de l'installation du système d'exploitation) s'affiche et indique les options que vous avez choisies. 13 Pour modifier les options d'installation, cliquez sur Back (Précédent). Si les options vous conviennent, cliquez sur Apply Now (Appliquer maintenant). L'installation du système d'exploitation commence.
book.book Page 74 Sunday, January 30, 2011 2:38 PM Pour plus d'informations sur le partitionnement du disque dur, voir la section «Partitionnement d'un disque dur», à la page 80. Pour créer une partition et commencer l'installation : a Cliquez sur Nouveau. b Indiquez la taille de la partition en Mo, puis cliquez sur Appliquer. Le système affiche le message suivant : Windows might create additional partition for system files (Windows peut créer une partition supplémentaire pour les fichiers système).
book.book Page 75 Sunday, January 30, 2011 2:38 PM Installation de Microsoft Windows Server 2008 R2 à l'aide du CD du système d'exploitation Avant d'installer Microsoft Windows Server 2008 à l'aide du CD du système d'exploitation, vous devez créer un support pour les pilotes de périphériques, télécharger l'image de disquette du contrôleur DRAC ou créer un disque de pilotes sur un lecteur USB.
book.book Page 76 Sunday, January 30, 2011 2:38 PM Téléchargement de pilotes à partir du site de support de Dell 1 Rendez-vous sur le site support.dell.com. 2 Cliquez sur Pilotes et téléchargements. 3 Dans le champ N° de série, cliquez sur Entrez un numéro de série. 4 Entrez le numéro de série du système sur lequel vous voulez installer Windows Server 2008 R2, puis cliquez sur OK. 5 Vous pouvez également cliquer sur Choisissez un modèle pour accéder au modèle voulu.
book.book Page 77 Sunday, January 30, 2011 2:38 PM Copiez tous les pilotes dans ce répertoire en conservant la structure d'arborescence téléchargée à partir du site Web support.dell.com.
book.book Page 78 Sunday, January 30, 2011 2:38 PM 8 Lisez attentivement ce dernier. Si vous en acceptez les conditions, sélectionnez J'accepte les termes du contrat de licence, puis cliquez sur Suivant. 9 Dans l'écran Quel type d'installation voulez-vous effectuer, sélectionnez Personnalisée (option avancée) pour effectuer une nouvelle installation. 10 Dans l'écran Où souhaitez-vous installer Windows, indiquez la partition sur laquelle vous souhaitez installer le système d'exploitation.
book.book Page 79 Sunday, January 30, 2011 2:38 PM L'écran Installation de Windows s'affiche et indique l'état d'avancement de l'installation. REMARQUE : l'installation peut prendre un certain temps. 11 Une fois l'installation terminée, le système redémarre. Avant d'ouvrir une session pour la première fois, vous devez définir le mot de passe administrateur. 12 Dans l'écran Le mot de passe de l'utilisateur doit être modifié avant la première ouverture de session, cliquez sur OK.
book.book Page 80 Sunday, January 30, 2011 2:38 PM Partitionnement d'un disque dur Le partitionnement du disque vous permet de diviser un disque dur physique en plusieurs disques durs virtuels. Chaque disque dur virtuel est appelé «partition».
book.book Page 81 Sunday, January 30, 2011 2:38 PM Tableau 3. Niveau de prise en charge pour les modèles de partitionnement Assistance Disque dur MBR Disque dur GPT Anciens systèmes d'exploitation tels que DOS, Microsoft Windows 98, etc.
book.book Page 82 Sunday, January 30, 2011 2:38 PM Choix d'un modèle de partitionnement Les éléments principaux à prendre en compte lors du choix d'un modèle de partitionnement sont les suivants : • Taille du disque dur • Version du système d'exploitation • Outils logiciels utilisés par le système d'exploitation Le modèle de partitionnement MBR est utilisé sur toutes les anciennes versions des systèmes d'exploitation Microsoft.
body.
Microsoft Windows Server 2008 R2 für Dell PowerEdge-Systeme Installation von Microsoft Windows Server 2008 R2
Anmerkungen und Vorsichtshinweise ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie den Computer besser einsetzen können. VORSICHTSHINWEIS: Ein VORSICHTSHINWEIS macht aufmerksam auf mögliche Beschädigung der Hardware oder Verlust von Daten bei Nichtbefolgung von Anweisungen. ____________________ Informationen in dieser Publikation sind Änderungen vorbehalten. © 2011 Dell Inc. Alle Rechte vorbehalten.
Inhalt Einführung . . . . . . . . . . . . . . . . . . . . . . . . 87 Übersicht . . . . . . . . . . . . . . . . . . . . . . . . . 87 Abschließende Einrichtung des vorinstallierten Betriebssystems Microsoft Windows Server 2008 R2 . . . . . . . . . . . . . . . . . . Installation von Microsoft Windows Server 2008 R2 . . . . . . . . . . . . . . . . 87 . . . . . . . . . . 89 Maßnahmen vor der Installation . . . . . . . . . .
86 Inhalt
Einführung Dieses Dokument enthält Informationen über Microsoft Windows Server 2008 R2 für Dell PowerEdge-Systeme sowie über Windows Server 2008 R2 Service Pack 1 (SP1). ANMERKUNG: Sofern nicht anders angegeben, gelten die Informationen in diesem Dokument für alle Service Packs des Betriebssystems.
4 Wählen Sie die Option Ich akzeptiere die Lizenzbedingungen aus und klicken Sie zum Starten der Installation auf Start, wenn Sie die Lizenzvereinbarung gelesen haben und damit einverstanden sind. ANMERKUNG: Bevor Sie das System einsetzen, sollten Sie sämtliche Software-Lizenzvereinbarungen lesen, die mit den Programmen geliefert wurden. ANMERKUNG: Wenn Sie die Option Ich akzeptiere die Lizenzbedingungen nicht markieren, wird die Installation abgebrochen.
Installation von Microsoft Windows Server 2008 R2 Sie können Microsoft Windows Server 2008 R2 mit einer der folgenden Methoden installieren: • „Installation von Microsoft Windows Server 2008 R2 mit Dell Unified Server Configurator (USC)“ auf Seite 90 • „Installation von Microsoft Windows Server 2008 R2 mit dem Dell Systems Management Tools and Documentation-Medium“ auf Seite 93 • „Installation von Microsoft Windows Server 2008 R2 mit dem Betriebssystemmedium“ auf Seite 97 VORSICHTSHINWEIS: Bei der folg
• Erstellen Sie ein Gerätetreibermedium (Diskette, USB-Laufwerk, CD oder DVD). ANMERKUNG: Dies gilt nur, wenn Sie das Betriebssystemmedium für die Installation von Microsoft Windows Server 2008 R2 verwenden. Installation von Microsoft Windows Server 2008 R2 mit Dell Unified Server Configurator (USC) ANMERKUNG: Dell USC-Unterstützung ist erst ab der neuesten Servergeneration verfügbar. Stellen Sie sicher, dass Ihr Server diese Unterstützung bietet.
7 Klicken Sie auf Weiter. Der Bildschirm Select Operating System (Betriebssystem auswählen) wird angezeigt. Er enthält eine Liste der kompatiblen Betriebssysteme. 8 Wählen Sie Microsoft Windows Server 2008 R2 aus und klicken Sie auf Next (Weiter). 9 Geben Sie an, ob Sie das Betriebssystem im UEFI- oder BIOS-Modus bereitstellen möchten. Klicken Sie dann auf Next (Weiter).
18 Geben Sie im Fenster Wo möchten Sie Windows installieren? die Partition an, auf der das Betriebssystem installiert werden soll. Gehen Sie wie folgt vor, um eine Partition zu erstellen und mit der Installation zu beginnen: a Klicken Sie auf Neu. b Legen Sie die Größe der Partition in MB fest und klicken Sie auf Übernehmen. Die Meldung Windows might create additional partition for system files (Windows erstellt möglicherweise eine zusätzliche Partition für Systemdateien) wird angezeigt.
Die folgende Meldung wird angezeigt: Das Kennwort wurde geändert. 21 Klicken Sie auf OK. Wenn Sie sich zum ersten Mal anmelden, wird das Fenster Desktop wird vorbereitet angezeigt. Die Installation des Betriebssystems ist damit abgeschlossen. Installation von Microsoft Windows Server 2008 R2 mit dem Dell Systems Management Tools and Documentation-Medium ANMERKUNG: Dell OpenManage Version 6.1 und höher ermöglicht die Bereitstellung von Microsoft Windows Server 2008 R2.
5 Navigieren Sie mit den Pfeiltasten zum Feld Boot Sequence (Startreihenfolge) und drücken Sie die Eingabetaste. 6 Konfigurieren Sie das CD-ROM-Laufwerk als erste Startoption und drücken Sie , um den Bildschirm BIOS Settings (BIOS-Einstellungen) zu beenden. Das System bereitet sich nun auf den Start vom optischen Laufwerk vor. Das Menü der Dell Systems Management Tools and Documentation Medien wird angezeigt. Verschiedene Optionen stehen zur Auswahl.
13 Klicken Sie ggf. auf Back (Zurück), um Installationsoptionen zu ändern. Wenn die angezeigten Optionen korrekt sind, klicken Sie auf Apply Now (Jetzt übernehmen). Die Installation des Betriebssystems beginnt. VORSICHTSHINWEIS: Nachdem alle Installationseinstellungen abgeschlossen sind, werden Sie von Dell Systems Build and Update Utility aufgefordert, das Medium aus dem Laufwerk zu nehmen. Nehmen Sie das Dell Systems Management Tools and Documentation-Medium aus dem optischen Laufwerk.
Weitere Informationen zur Festplattenpartitionierung finden Sie unter „Partitionieren eines Laufwerks“ auf Seite 102. Gehen Sie wie folgt vor, um eine Partition zu erstellen und mit der Installation zu beginnen: a Klicken Sie auf Neu. b Legen Sie die Größe der Partition in MB fest und klicken Sie auf Übernehmen. Die Meldung Windows might create additional partition for system files (Windows erstellt möglicherweise eine zusätzliche Partition für Systemdateien) wird angezeigt. c Klicken Sie auf OK.
26 Klicken Sie auf OK. 27 Wenn Sie sich zum ersten Mal anmelden, wird das Fenster Desktop wird vorbereitet angezeigt. Die Installation des Betriebssystems ist damit abgeschlossen. Installation von Microsoft Windows Server 2008 R2 mit dem Betriebssystemmedium Bevor Sie Microsoft Windows Server 2008 mit dem Betriebssystemmedium installieren, müssen Sie ein Gerätetreibermedium erstellen, das DRAC-DiskettenImage herunterladen oder eine USB-Laufwerktreiberdiskette erstellen.
Herunterladen von Treibern von der Dell Support-Website 1 Rufen Sie die Website support.dell.com auf. 2 Klicken Sie auf Treiber und Downloads. 3 Klicken Sie im Feld Wählen Sie eine Service-Tag-Nummer aus auf TagNummer eingeben. 4 Geben Sie die Service-Tag-Nummer des Systems ein, auf dem Sie Windows Server 2008 R2 installieren möchten und klicken Sie auf OK. 5 Alternativ dazu können Sie auch auf Modell auswählen klicken und zu dem gewünschten Modell navigieren.
Erstellen der USB-Laufwerktreiberdiskette zum automatischen Laden aller Treiber Erstellen Sie $WinPEdriver$ direkt im Stammverzeichnis des USB-Geräts. Kopieren Sie alle Treiber in dieses Verzeichnis. Behalten Sie die Verzeichnisstruktur bei, in der Sie die Dateien von support.dell.com heruntergeladen haben.
5 Nehmen Sie im Fenster Windows installieren die gewünschten Einstellungen für Sprache, Uhrzeit und Währung und Tastatur vor. Klicken Sie auf Weiter. 6 Klicken Sie im Bildschirm Windows Server 2008 R2 auf Jetzt installieren. 7 Wählen Sie im Bildschirm Wählen Sie das zu installierende Betriebssystem das gewünschte Betriebssystem in der Liste aus und klicken Sie auf Weiter. Der Bildschirm Lesen Sie bitte die Lizenzbedingungen wird angezeigt. 8 Lesen Sie die Informationen aufmerksam durch.
ANMERKUNG: Für die primäre Partition wird eine Größe von 40 GB empfohlen. Wenn Sie Ihr System um zusätzlichen Arbeitsspeicher erweitern, benötigen Sie unter Umständen mehr Platz auf der primären Partition, um die Auslagerungsdatei und die Ruhezustand-Daten speichern zu können. Während der Installation wird auf dem Bildschirm eine Empfehlung für die Partitionsgröße angezeigt. Der empfohlene Wert richtet sich nach dem Arbeitsspeicher Ihres Systems. Befolgen Sie die Anweisungen auf dem Bildschirm.
Schritte bei der Erstkonfiguration und Server Manager Nach der Anmeldung wird der Bildschirm Aufgaben der Erstkonfiguration angezeigt. Hier können Sie verschiedene Schritte ausführen, um Systeminformationen bereitzustellen und das System zu aktualisieren und anzupassen. Nachdem Sie das Fenster Aufgaben der Erstkonfiguration geschlossen haben, wird der Bildschirm Server-Manager angezeigt.
Master Boot Record-Schema Das Master Boot Record (MBR)-Schema ist ein Legacy-Partitionsschema, das bei den meisten Betriebssystemen verwendet werden kann. Der gesamte Speicherplatz einer Festplatte ist auf höchstens vier Hauptpartitionen aufgeteilt. GUID-Partitionstabellen-Schema Das GUID-Partitionstabellen-Schema (GPT) ist ein neuer Standard für die Gestaltung einer Partitionstabelle auf einem physikalischen Festplattenlaufwerk.
Auswählen eines Partitionsschemas Die folgenden Faktoren sind für die Entscheidung zwischen den beiden Partitionsschemata hauptsächlich entscheidend: • Festplattengröße • Version des Betriebssystems • Softwarewerkzeuge, die unter dem Betriebssystem verwendet werden Das MBR-Partitionsschema wird für ältere Versionen der MicrosoftBetriebssysteme verwendet. Es unterstützt Laufwerke, die kleiner als 2 TB sind.
body.
Dell PowerEdge システム用 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 のインストール
メモおよび注意 メモ:コンピュータを使いやすくするための重要な情報を説明しています。 注意: 手順に従わないと、ハードウェアの損傷やデータの損失につながる 可能性があることを示しています。 ____________________ 本書の内容は予告なく変更されることがあります。 © 2010 Dell Inc. All rights reserved. Dell Inc. の書面による許可のない複製は、 いかなる形態においても厳重に禁じられています。 本書に使用されている商標:Dell™、DELL ロゴ、OpenManage™、および PowerEdge® は Dell Inc. の商標です。Microsoft®、Windows®、および Windows Server® は米国その 他の国における Microsoft Corporation の商標または登録商標です。 商標または製品の権利を主張する事業体を表すためにその他の商標および社名が使用され ていることがあります。それらの商標や会社名は、一切 Dell Inc. に帰属するものではあり ません。 2011 年 1 月 Rev.
目次 はじめに . 概要 . . . . . . . . . . . . . . . . . . . . . . . . 109 . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 プリインストールされた Microsoft Windows Server 2008 R2 のセットアップの完了 . . . . . . . 109 . . . . . . . . 111 . . . . . . . . . . . . . 112 Microsoft Windows Server 2008 R2 のインストール . . . . . . . . . . . . インストール前の要件 . Dell Unified Server Configurator(USC)を 使用した Microsoft Windows Server 2008 R2 のインストール . . . . . . . . . . . . . . . . . . . .
108 目次
はじめに 本書では、Dell PowerEdge システム用の Microsoft Windows Server 2008 R2 について説明します。また本書には、Windows Server 2008 R2 Service Pack 1(SP1)に関する情報も含まれています。 メモ:特に指示がない限り、本書の情報は OS のすべてのサービスパック に適用されます。 概要 本書の内容は以下のとおりです。 • Microsoft Windows Server オペレーティングシステムのインストール • ドライブのパーティション プリインストールされた Microsoft Windows Server 2008 R2 のセットアップの完了 メモ:Windows Server 2008 R2 SP1 がインストールメディアに組み込まれ ている場合は、この文書の手順に従ってください。組み込まれていない場 合は、Windows Server 2008 R2 OS をインストールし、Windows Update か らアップデートをダウンロードして、インストール後にサービスパックを 適用します。 この項では、W
Please read the license terms(ライセンス条項をお読みください) ウィンドウが表示されます。 4 ライセンス契約をお読みになり、条項に同意する場合は、I accept the license terms(同意します)を選択し、Start(開始)をクリックし てインストールを開始します。 メモ:システムを使用する前に、各プログラムに付属のソフトウェア 製品ライセンス契約をお読みください。 メモ:I accept the license terms(同意します)を選択しないとイン ストールを続行することはできません。 5 初めてのログインの前に、Administrator パスワードの変更を求める メッセージが表示されます。OK をクリックし、Administrator パス ワードを入力します。 6 右矢印をクリックします。 Password Change Confirmation(パスワード変更の確認)画面が表 示されます。 7 OK をクリックします。 メモ:パスワードは、要求される複雑さを満たしている必要がありま す。パスワードに要求される複雑さの詳細については、OS のマニ
Microsoft Windows Server 2008 R2 のインス トール Microsoft Windows Server 2008 R2 のインストールは、次のいずれかの 方法で行います。 • 112 ページの「Dell Unified Server Configurator(USC)を使用した Microsoft Windows Server 2008 R2 のインストール」 • 116 ページの「Dell Systems Management Tools and Documentation メディアを使用した Microsoft Windows Server 2008 R2 のインス トール」 • 120 ページの「『再インストール用』メディアを使用した Microsoft Windows Server 2008 R2 のインストール」 注意: 次のインストール手順を実行すると、ハードドライブ上のすべての データが消去されます。インストールを開始する前に、重要なデータをすべ てバックアップしておくことをお勧めします。 メモ: OS が同梱されていない Dell システムを購入された場
インストール前の要件 OS をインストールする前に、次の準備を行ってください。 • 『再インストール用』メディアに追加のマニュアルがある場合は、す べてお読みください。 • お使いのシステムに、インストールに必要な最新の BIOS、ファーム ウェア、およびドライバがあることを確認します。必要に応じて、 support.dell.
4 Unified Server Configurator ウィンドウで、ハードウェア、Diagnostics (診断)の設定、または変更の設定を行う場合は、該当するオプション をクリックします。 変更の必要がない場合は、OS Deployment(OS の展開)をクリック します。 5 In the Operating System Deployment(OS の展開)ウィンドウで、 Deploy OS(OS の展開)をクリックします。 Configure or Skip RAID(RAID の構成または省略)ウィンドウが表 示されます。RAID が設定済みの場合は、既存の RAID 構成の詳細が ウィンドウに表示されます。 6 Go directly to OS Deployment(OS の展開に移動する)を選択しま す。RAID が未設定の場合は、ここで設定します。 7 次へをクリックします。 Select Operating System(オペレーティングシステムの選択)ウィ ンドウに互換性のある OS のリストが表示されます。 8 Microsoft Windows Server 2008 R2
14 Windows Server 2008 R2 画面で、Install Now(今すぐインストー ル)をクリックします。 Operating System Install(オペレーティングシステムのインストー ル)画面が表示されます。 15 Operating System Install(オペレーティングシステムのインストー ル)画面で、インストールする OS を選択し、Next(次へ)をクリッ クします。 Please read the license terms(ライセンス条項をお読みください) ウィンドウが表示されます。 16 表示された内容をよく読みます。同意する場合は、I accept the license terms(同意します)を選択し、Next(次へ)をクリックします。 17 Which Type of Installation Do You Want(実行するインストールの 種類を選択してください)画面で、Custom (advanced)(カスタム) (詳細設定)が選択されていない場合は、これを選択します。 18 Where do you want to install Windo
c OK をクリックします。 メモ: Primary(プライマリ)パーティションの推奨サイズは、 40 GB です。システムにメモリを増設するには、ページファイル と休止状態に対応するために、プライマリパーティションのス ペースを追加しなければならない場合があります。インストール 中に、システムのメモリサイズに基づいて、パーティションの推 奨サイズが画面に表示されます。画面に表示される指示に従いま す。Core installation(コアインストール)を選択すると、プライ マリパーティションに必要なハードドライブ領域が少なくなる 場合があります。ドライブパーティションの詳細については、 125 ページの「ドライブのパーティション」を参照してください。 d 新しく作成されたパーティションを選択し、Next(次へ)をク リックします。 Installing Windows(Windows をインストールしています)画面が 表示され、インストールが開始します。 OS がインストールされると、システムは再起動します。初めてのロ グインを行う前に、Administrator パスワードを設定する必要があり
Dell Systems Management Tools and Documentation メディアを使用した Microsoft Windows Server 2008 R2 のインス トール メ モ: Dell OpenManage バ ー ジ ョ ン 6.1 以 降 で は、Microsoft Windows Server 2008 R2 の導入が可能です。バージョン 6.2 以降では、フルアプリ ケーションと更新されたドライバのサポートが予定されています。Dell OpenManage バ ー ジ ョ ン 6.
これで、システムはオプティカルドライブから起動するようになり ます。 『Dell Systems Management Tools and Documentation』メディア のメニューといくつかのオプションが表示されます。 7 Dell Systems Build and Update Utility を選択します。 これでシステムは選択した場所から起動し、Dell Systems Build and Update Utility 画面が表示されます。 メモ: ドライブの速度によっては、起動に数分かかる場合があります。 8 System Build and Update Utility のホームページで、Server OS Installation(サーバー OS のインストール)に対して Configure(設 定)を選択します。 9 次のページで、時刻とタイムゾーンを設定します。次に Continue(続 行)をクリックします。 Select Operating System(オペレーティングシステムの選択)画面 に互換性のある OS のリストが表示されます。 10 Microsoft Windows
注意: インストールの設定のすべてがファイナライズされた後で、Dell Systems Build and Update Utility 画面でメディアを取り出すように指示さ れます。Dell Systems Management Tools and Documentation メディアを取 り出します。システムがローカルハードドライブから再起動し、Windows のインストールメディアをセットするように指示されます。この段階では、 オプティカルドライブから直接起動しないでください。 14 Windows インストールメディアをオプティカルドライブに挿入して OK をクリックします。 15 インストール中にメッセージが表示される場合があります。OK をク リックしてインストールを続行します。 注意: ローカルハードドライブのすべてのシステムパーティションとデー タが消去されます。 16 Install Windows(Windows のインストール)画面で、Language(言 語)、Time and Currency Format(時刻と通貨の表示形式)、および Keyboard or Input Meth
b パーティションのサイズを MB で指定し、Apply(適用)をクリッ クします。 Windows might create additional partition for system files(シ ステムファイル用の追加パーティションが作成される場合があり ます)というメッセージが表示されます。 c OK をクリックします。 メモ: Primary(プライマリ)パーティションの最小推奨サイズ は、40 GB です。システムにメモリを増設するには、ページファ イルと休止状態に対応するために、プライマリパーティションの スペースを追加しなければならない場合があります。インストー ル中に、システムのメモリサイズに基づいて、パーティションの 推奨サイズが画面に表示されます。画面に表示される指示に従い ます。Core installation(コアインストール)を選択すると、プラ イマリパーティションに必要なハードドライブ領域が少なくな る場合があります。ドライブパーティションの詳細については、 125 ページの「ドライブのパーティション」を参照してください。 d 新しく作成されたパーティションを
『再インストール用』メディアを使用した Microsoft Windows Server 2008 R2 のインス トール 『再インストール用』メディアを使用して Microsoft Windows Server 2008 をインストールする前に、デバイスドライバメディアの作成、 DRAC ディスケットイメージのダウンロード、または USB ドライブのド ライバディスクの作成を行う必要があります。 デバイスドライバメディアの作成 以下の各項で説明する方法のいずれかを使用して、デバイスドライバメ ディアを作成します。 Dell Systems Management Tools and Documentation メディアからのドライ バのダウンロード 1 Dell Systems Management Tools and Documentation メディアをシ ステムにセットします。 Welcome to Dell Service and Diagnostic Utilities(Dell Service and Diagnostic Utilities ユーティリティへようこそ)画面が表示されます。 2
デルサポートサイトからのドライバのダウンロード 1 support.jp.dell.
すべてのドライバを自動ロードする USB ドライブドライバディ スクの作成 USB デバイスのルートディレクトリに $WinPEdriver$ ディレクトリを 作成します。 すべてのドライバをそのディレクトリにコピーし、support.dell.
5 Install Windows(Windows のインストール)画面で、適切な Language (言語)、Time & Currency(時刻と通貨)、および Keyboard(キー ボード)の値を選択します。次へ をクリックします。 6 Windows Server 2008 R2 画面で、Install Now(今すぐインストー ル)をクリックします。 7 Select the operating system you want to install(インストールする オペレーティングシステムを選択します)画面で、利用可能なリスト から OS を選択し、Next(次へ)をクリックします。 Please read the license terms(ライセンス条項をお読みください) ウィンドウが表示されます。 8 表示された内容をよく読みます。同意する場合は、I accept the license terms(同意します)を選択し、Next(次へ)をクリックします。 9 Which type of installation do you want(実行するインストールの 種類を選択してください)画面
Windows might create additional partition for system files(シ ステムファイル用の追加パーティションが作成される場合があり ます)というメッセージが表示されます。 c OK をクリックします。 メモ: Primary(プライマリ)パーティションの最小推奨サイズは、 40 GB です。システムにメモリを増設するには、ページファイルと休 止状態に対応するために、プライマリパーティションのスペースを追 加しなければならない場合があります。インストール中に、システム のメモリサイズに基づいて、パーティションの推奨サイズが画面に表 示されます。画面に表示される指示に従います。Core installation(コ アインストール)を選択すると、プライマリパーティションに必要な ハードドライブ領域が少なくなる場合があります。ドライブパーティ ションの詳細については、125 ページの「ドライブのパーティション」 を参照してください。 新しく作成されたパーティションを選択し、Next(次へ)をク リックします。 Installing Windows(Windows
初期設定タスクとサーバーマネージャ ログインすると、Initial Configuration Tasks(初期設定タスク)画面が 表示されます。システム情報の提供、システムの更新、およびシステム のカスタマイズのために、各種のタスクを行います。 Initial Configuration Tasks(初期設定タスク)ウィンドウを閉じると、 Server Manager(サーバーマネージャ)画面が表示されます。Server Manager(サーバーマネージャ)を使用して、次のタスクを行います。 • Roles(役割)の表示または管理 • Features(機能)の表示 • Diagnostics(診断)の実行 • Configuration(設定)の表示または変更 • Storage(ストレージ)の表示または管理 詳細については、Microsoft のサポートサイト support.microsoft.
GUID パーティションテーブルスキーマ GUID パーティションテーブル(GPT)スキーマは、物理ハードドライ ブ上のパーティションテーブル配置に関する新しい規格です。拡張 ファームウェアインタフェース(EFI)規格の一部であり、システム BIOS を置き換えるものです。 表 3 では、このパーティションスキーマでサポートされる基本レベルを 説明しています。 表3 パーティションスキーマによるサポートレベル サポート MBR ハード GPT ハード ドライブ ドライブ DOS、Microsoft Windows 98 などのレガシー OS はい いいえ 2 TB 以上のハードドライブ いいえ はい OS の x86 バージョンでのデータハードドライブ はい はい OS の x64 バージョンでのデータハードドライブ はい はい OS の x86 バージョンでのブートハードドライブ はい いいえ OS の x64 バージョンでのブートハードドライブ はい はい 5 個以上のプライマリパーティション いいえ はい BIOS モードでの起動のサポート はい い
MBR パーティションスキーマは、Microsoft OS のすべての旧バージョン で使用されます。MBR パーティションスキーマは、ボリュームサイズが 2 TB 未満のハードドライブをサポートします。Windows Server 2008 R2、Windows Server 2008、または Windows Small Business Server 2008、Windows Small Business Server 2011 などの新しい OS、および容 量が 2 TB を超えるハードドライブの場合は、GPT パーティションスキー マを使用します。 メモ: GPT パーティションのほうが柔軟であり、大容量のハードドライブ をサポートし、MBR パーティションスキーマにはない多数の機能やリカバ リメカニズムがあるため、GPT を使用することをお勧めします。 パーティションとボリュームの詳細については、technet.microsoft.com でパーティションとボリュームに関する情報を参照してください。GPT の詳細については、Windows および GPT に関するよくある質問を microsoft.
128 Microsoft Windows Server 2008 R2 のインストール
body.
Dell Power Edge 시스템용 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2008 R2 설치
주 및 주의 주: "주"는 컴퓨터를 보다 효율적으로 사용하는 데 도움을 주는 중요 정보를 알 려줍니다. 주의: "주의"는 지침을 준수하지 않을 경우 하드웨어 손상이나 데이터 손실의 위험이 있음을 알려줍니다. ____________________ 본 발행물에 수록된 정보는 사전 통보 없이 변경될 수 있습니다. © 2011 Dell Inc. 저작권 본사 소유. Dell Inc.의 서면 승인 없이 어떠한 방식으로든 본 자료를 무단 복제하는 행위는 엄격히 금지됩 니다. 본 설명서에 사용된 상표: Dell™, DELL 로고, OpenManage™ 및 PowerEdge™는 Dell Inc.의 상 표입니다. Microsoft®, Windows® 및 Windows Server®는 미국 및/또는 기타 국가/지역에서 Microsoft Corporation의 상표 또는 등록 상표입니다. 본 발행물에서 특정 회사의 상표 및 회사 이름 또는 제품을 지칭하기 위해 기타 상표 및 상호 를 사용할 수도 있습니다. Dell Inc.
차례 소개 . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 개요 . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 미리 설치된 Microsoft Windows Server 2008 R2 운영 체제의 설치 완료 . . . . . . . . . . . . . . . . . 133 . . . . . . . 135 . . . . . . . . . . . . . . . . 135 Microsoft Windows Server 2008 R2 설치 . 설치 전 요구 사항 . Dell USC(Unified Server Configurator) 를 사용하여 Microsoft Windows Server 2008 R2 설치 . . . . . . . .
132 차례
소개 본 설명서는 Dell Power Edge 시스템용 Microsoft Windows Server 2008 R2 에 대한 정보를 제공합니다. 또한 Windows Server 2008 R2 서비스 팩 1(SP1) 에 대한 정보도 포함하고 있습니다. 주: 달리 명시되어 있지 않는 한 본 설명서의 정보는 운영 체제의 모든 서비스 팩에 적용됩니다. 개요 본 설명서는 다음 내용을 제공합니다. • Microsoft Windows Server 운영 체제 설치 • 드라이브 분할 미리 설치된 Microsoft Windows Server 2008 R2 운영 체제의 설치 완료 주: Windows Server 2008 R2 SP1이 설치 매체에 통합되어 있는 경우 본 설명서 에 제시된 다음 지침을 따르십시오. 통합되어 있지 않은 경우 Windows Server 2008 R2 운영 체제를 설치하고 Windows Update에서 업데이트를 다운로드하여 서비스 팩의 설치 후 작업을 적용하십시오.
4 사용권 계약을 읽고 해당 조건에 동의하는 경우 동의함 옵션을 선택하 고 시작을 클릭하여 설치를 시작합니다. 주: 시스템을 사용하기 전에 구입한 각 프로그램에 포함된 소프트웨어 사용권 계약서를 읽어 보십시오. 주: 동의함 옵션을 선택하지 않으면 설치를 계속할 수 없습니다. 5 처음 로그인하기 전에 관리자 암호를 변경하라는 메시지가 표시됩니 다. 확인을 클릭하고 관리자 암호를 입력합니다. 6 오른쪽 화살표를 클릭합니다. 암호 변경 확인 화면이 표시됩니다. 7 확인을 클릭합니다. 주: 암호는 암호 복잡성 규칙을 준수해야 합니다. 암호 복잡성 규칙에 대 한 자세한 내용은 운영 체제 설명서를 참조하십시오. 주: 이 작업을 완료하는 데 몇 분 정도 걸릴 수 있습니다. 초기 구성 작업 창과 서버 관리자 창이 차례로 표시됩니다. Windows Server 2008 R2 운영 체제가 시스템에 설치되었습니다. 설치 완료에 관한 자세한 내용은 소프트웨어에 포함된 설명서나 support.microsoft.
Microsoft Windows Server 2008 R2 설치 다음 방법 중 하나를 사용하여 Microsoft Windows Server 2008 R2를 설치할 수 있습니다. • 136페이지의 "Dell USC(Unified Server Configurator)를 사용하여 Microsoft Windows Server 2008 R2 설치" • 138페이지의 "Dell Systems Management Tools and Documentation 매 체를 사용하여 Microsoft Windows Server 2008 R2 설치" • 142페이지의 "운영 체제 매체를 사용하여 Microsoft Windows Server 2008 SP2 설치" 주의: 다음 설치 과정은 하드 드라이브의 모든 데이터를 삭제합니다. 설치를 시작하기 전에 중요한 데이터는 모두 백업하는 것이 좋습니다.
Dell USC(Unified Server Configurator)를 사용하여 Microsoft Windows Server 2008 R2 설치 주: 향후 Dell USC 지원은 최신 서버 버전에서만 제공됩니다. 해당 서버에서 USC를 지원하는지 확인하십시오. Dell USC를 사용하여 Microsoft Windows Server 2008 R2를 설치하려면 다 음을 수행하십시오. 1 키보드, 모니터, 마우스 및 추가 주변 장치를 시스템에 연결합니다. 2 시스템 및 연결된 주변 장치의 전원을 켭니다. 3 POST 중에 키를 눌러 System Services(시스템 서비스)를 시작합 니다. Initializing UEFI. Please wait...(UEFI를 초기화하는 중입니다. 잠시 기 다리십시오.)와 Entering System Services...Starting Unified Server Configurator(시스템 서비스를 시작하는 중입니다.
10 Insert OS Media(운영 체제 매체 삽입) 창에서 Windows Server 2008 R2 매체를 삽입하고 Next(다음)를 클릭합니다. 11 Reboot the System(시스템 다시 부팅) 화면에서 화면의 지시를 따른 후 Finish(마침)를 클릭합니다. 시스템에 Windows 운영 체제가 설치되어 있는 경우에는 Press any key to boot from the CD/DVD. Press any key to begin the installation(아무 키나 눌러 CD/DVD에서 부팅하십시오. 아무 키나 눌러 설치를 시작하 십시오)이라는 메시지가 표시됩니다. 12 Windows 설치 화면에서 언어, 시간 및 통화 형식, 키보드 또는 입력 방 법 등에 대한 적절한 옵션을 선택합니다. 13 계속하려면 다음을 클릭합니다. 14 Windows Server 2008 R2 화면에서 지금 설치를 클릭합니다. 운영 체제 설치 화면이 표시됩니다.
주: 주 파티션의 권장 크기는 40GB입니다. 시스템에 메모리를 추가 로 설치하는 경우에는 페이지 파일 및 최대 절전 모드에 맞게 주 파 티션의 크기를 늘려야 할 수도 있습니다. 설치하는 동안 시스템 메 모리 크기에 따라 화면에 권장 파티션 크기가 표시됩니다. 화면의 지시를 따릅니다. 최소 설치를 선택하는 경우에는 주 파티션용으 로 더 작은 하드 드라이브 공간이 사용될 수 있습니다. 드라이브 분 할에 대한 자세한 내용은 146페이지의 "드라이브 분할"을 참조하십 시오. d 새로 만든 운영 체제 파티션을 선택하고 다음을 클릭합니다. Windows 설치 화면이 표시되고 설치 과정이 시작됩니다. 운영 체제가 설치되면 시스템이 다시 부팅됩니다. 처음 로그인할 때 관 리자 암호를 설정해야 합니다. 19 The user's password must be set before you login for the first time(처음 로그인하려면 먼저 사용자 암호를 설정해야 합니다) 화면에서 확인을 클릭합니다.
광학 드라이브로 부팅하도록 시스템을 구성해야 합니다. 다음과 같이 Dell Systems Management Tools and Documentation 매체를 사용하여 운영 체제 를 설치하십시오. 1 키보드, 모니터, 마우스 및 추가 주변 장치를 시스템에 연결합니다. 2 시스템 및 연결된 주변 장치의 전원을 켭니다. 3 광학 드라이브에 Dell Systems Management Tools and Documentation 매 체를 넣습니다. 4 설치 유틸리티를 실행하라는 메시지가 나타나면 키를 누릅니다. BIOS Settings(BIOS 설정) 화면이 표시됩니다. 5 화살표 키를 사용하여 Boot Sequence(부팅 순서) 필드를 스크롤한 다음 키를 누릅니다. 6 첫 번째 부팅 옵션으로 사용할 CD ROM 드라이브를 구성하고 키를 눌러 BIOS Settings(BIOS 설정) 화면을 종료합니다. 이제 시스템을 광학 드라이브로 부팅할 준비가 되었습니다.
Select RAID Configuration(RAID 구성 선택) 스크린이 표시됩니다. RAID가 구성된 경우 화면에 기존의 RAID 구성 세부 정보가 표시됩 니다. 12 Retain existing configuration on the system(기존 시스템 구성 유지) 을 선택합니다. RAID가 아직 구성되지 않았으면 구성한 후 Continue(계속)를 클릭합니다. 선택한 설치 옵션과 함께 Operating System Installation Summary(운영 체제 설치 요약) 화면이 표시됩니다. 13 설치 옵션을 변경하려면 Back(뒤로)을 클릭합니다. 표시된 옵션이 정확 하면 Apply Now(지금 적용)를 클릭합니다. 운영 체제 설치가 시작됩니다. 주의: Dell Systems Build and Update Utility 화면에 설치 설정이 모두 완료되면 매체를 제거하라는 메시지가 표시됩니다.
드라이브 분할에 대한 자세한 내용은 146페이지의 "드라이브 분할"을 참조하십시오. 파티션을 만들고 설치를 시작하려면 다음을 수행하십시오. a 새로 만들기를 클릭합니다. b 파티션 크기를 MB 단위로 지정하고 적용을 클릭합니다. Windows might create additional partition for system files(시스템 파일에 대해 추가 파티션을 만들 수 있습니다)라는 메시지가 표시 됩니다. c 확인을 누릅니다. 주: 주 파티션의 최소 권장 크기는 40GB입니다. 시스템에 메모리를 추 가로 설치하는 경우에는 페이지 파일 및 최대 절전 모드에 맞게 주 파 티션의 크기를 늘려야 할 수도 있습니다. 설치하는 동안 시스템 메모 리 크기에 따라 화면에 권장 파티션 크기가 표시됩니다. 화면의 지시 를 따릅니다. 최소 설치를 선택하는 경우에는 주 파티션용으로 더 작 은 하드 드라이브 공간이 사용될 수 있습니다.
운영 체제 매체를 사용하여 Microsoft Windows Server 2008 SP2 설치 운영 체제 매체를 사용하여 Microsoft Windows Server 2008을 설치하기 전 에 먼저 장치 드라이버 매체를 만들고 DRAC 디스켓 이미지를 다운로드하 거나 USB 드라이브 드라이버 디스크를 만들어야 합니다. 장치 드라이버 매체 만들기 다음 항목에서 설명하는 방법 중 하나를 사용하여 장치 드라이버 매체를 만듭니다. Dell Systems Management Tools and Documentation 매체에서 드라이버 다운로드 1 시스템에 Dell Systems Management Tools and Documentation 매체를 넣 습니다. Welcome to Dell Service and Diagnostic Utilities(Dell 서비스 및 진단 유틸리티 시작) 화면이 표시됩니다. 2 서버 모델 및 운영 체제(Microsoft Windows Server 2008 R2)를 선택합 니다.
5 또는 모델 선택을 클릭하여 특정 모델을 탐색합니다. 6 드롭다운 목록에서 시스템 유형, 운영 체제, 드라이버 언어, 범주 및 중 요성을 선택합니다. 7 선택 항목에 해당하는 드라이버가 나타납니다. 사용 가능한 목록에서 필요한 드라이버를 디스켓 드라이브, USB 드라이브, CD 또는 DVD로 다운로드합니다. 8 142페이지의 "운영 체제 매체를 사용하여 Microsoft Windows Server 2008 SP2 설치"에 설명되어 있는 운영 체제 설치 과정을 수행하는 동안 Load Driver(드라이버 로드) 옵션으로 만든 매체를 사용하여 대용량 저 장소 드라이버를 로드합니다. DRAC 디스켓 이미지 사용 Dell 지원 웹 사이트(support.dell.com)에 있는 DRAC(Dell Remote Access Controller) 4, DRAC 5 또는 iDRAC 디스켓 이미지를 사용하여 Dell 대용량 저 장 장치 드라이버를 설치합니다.
시작 시 몇 개의 BIOS 화면이 나타나지만, 사용자 조작은 필요하지 않습 니다. 주: 이 설치 방법은 BIOS 및 UEFI 모드에서 지원됩니다. 3 DVD 드라이브에 Microsoft Windows Server 2008 R2 매체를 넣습니다. 주: 시스템에 Windows 운영 체제가 설치되어 있는 경우에는 Press any key to boot from the CD/DVD...(아무 키나 눌러 CD/DVD에서 부팅하십시 오...)라는 메시지가 표시됩니다. 아무 키나 눌러 설치를 시작하십시오. 4 다음과 같은 메시지가 표시됩니다. Windows에서 파일 로드 중 파일이 로드된 후 Windows 설치 마법사가 표시됩니다. 5 Windows 설치 화면에서 적절한 언어, 시간 및 통화, 키보드 값을 선택합 니다. 다음을 클릭합니다. 6 Windows Server 2008 R2 화면에서 지금 설치를 클릭합니다. 7 설치할 운영 체제를 선택합니다 화면의 목록에서 운영 체제를 선택한 후 다음을 클릭합니다.
파티션을 만들고 설치를 시작하려면 다음을 수행하십시오. a 새로 만들기를 클릭합니다. b 파티션 크기를 MB 단위로 지정하고 적용을 클릭합니다. Windows might create additional partition for system files(시스템 파일에 대해 추가 파티션을 만들 수 있습니다)라는 메시지가 표시 됩니다. c 확인을 누릅니다. 주: 주 파티션의 최소 권장 크기는 40GB입니다. 시스템에 메모리를 추가 로 설치하는 경우에는 페이지 파일 및 최대 절전 모드에 맞게 주 파티션 의 크기를 늘려야 할 수도 있습니다. 설치하는 동안 시스템 메모리 크기 에 따라 화면에 권장 파티션 크기가 표시됩니다. 화면의 지시를 따릅니 다. 최소 설치를 선택하는 경우에는 주 파티션용으로 더 작은 하드 드라 이브 공간이 사용될 수 있습니다. 드라이브 분할에 대한 자세한 내용은 146페이지의 "드라이브 분할"을 참조하십시오. 새로 만든 운영 체제 파티션을 선택하고 다음을 클릭합니다.
초기 구성 작업 및 서버 관리자 로그인하면 초기 구성 작업 화면이 표시됩니다. 이 화면에서 시스템 정보 를 제공하고, 시스템을 업데이트하고 사용자 지정하는 다양한 작업을 수 행할 수 있습니다. 초기 구성 작업 창을 닫으면 서버 관리자 화면이 표시됩니다. 서버 관리자 를 사용하여 다음 작업을 수행할 수 있습니다. • 역할 보기 또는 관리 • 기능 보기 • 진단 수행 • 구성 보기 또는 수정 • 저장소 보기 또는 관리 자세한 내용은 Microsoft 지원 웹 사이트(support.microsoft.com)를 참조하 십시오. 주: 이 창을 다시 표시 안 함 옵션을 선택하지 않으면 시스템에 로그인할 때마 다 초기 구성 작업 창과 서버 관리자가 나타납니다. 드라이브 분할 드라이브 분할을 통해 실제 하드 드라이브를 여러 개의 가상 하드 드라이 브로 나눌 수 있습니다. 이때 각 가상 드라이브를 파티션이라고 합니다. 파티션 구성표에는 두 가지 유형이 있습니다.
표 3에서는 각각의 파티션 구성표가 제공하는 기본 지원 수준에 대한 정보 를 설명합니다. 표 3. 파티션 구성표에서 제공하는 지원 수준 지원 MBR 하드 드라이브 GPT 하드 드라이브 DOS, Microsoft Windows 98 등 고유 운영 체제 예 아니오 2TB 이상의 하드 드라이브 아니오 예 x86 버전 운영 체제의 데이터 하드 드라이브 예 예 x64 버전 운영 체제의 데이터 하드 드라이브 예 예 x86 버전 운영 체제의 부팅 하드 드라이브 예 아니오 x64 버전 운영 체제의 부팅 하드 드라이브 예 예 4 개 이상의 주 파티션 아니오 예 BIOS 모드를 통해 부팅 지원 예 아니오 UEFI 모드를 통해 부팅 지원 아니오 예 파티션 구성표 선택 파티션 구성표 선택 시 주로 고려해야 할 사항은 다음과 같습니다.
148 Microsoft Windows Server 2008 R2 설치
body.
Microsoft Windows Server 2008 R2 para sistemas Dell PowerEdge Instalación de Microsoft Windows Server 2008 R2
Notas y precauciones NOTA: una NOTA proporciona información importante que le ayudará a utilizar mejor el equipo. PRECAUCIÓN: un mensaje de PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos si no se siguen las instrucciones. ____________________ La información contenida en esta publicación puede modificarse sin previo aviso. © 2011 Dell Inc. Todos los derechos reservados.
Contenido Introducción . . . . . . . . . . . . . . . . . . . . . . . Descripción general . . . . . . . . . . . . . . . . . . . Finalización de la configuración del sistema operativo Microsoft Windows Server 2008 R2 preinstalado . . . . . . . . . . . . . . . . 153 . . . . . 153 . . . . . . . 155 . . . . . . . . 155 Instalación de Microsoft Windows Server 2008 R2 . . . . . . . . . . . . . . . . . . . Requisitos previos a la instalación .
Partición de una unidad . . . . . . . . . . . . . . . . Esquema de registro de arranque maestro. 152 Contenido 168 . . . 169 Esquema de tabla de partición GUID . . . . . . . 169 Selección de esquemas de partición . . . . . . .
Introducción En este documento se proporciona información sobre Microsoft Windows Server 2008 R2 para sistemas Dell PowerEdge. Asimismo, también se incluye información sobre Windows Server 2008 R2 Service Pack 1 (SP1). NOTA: a menos que se especifique lo contrario, la información de este documento se aplica a todos los Service Pack del sistema operativo.
Aparece la ventana Please read the license terms (Lea las condiciones de la licencia). 4 Seleccione la opción I accept the license terms (Acepto las condiciones de la licencia) y haga clic en Start (Iniciar) para comenzar la instalación si ha leído los contratos de licencia y acepta las condiciones. NOTA: antes de utilizar el sistema, lea los contratos de licencia de software incluidos con todos los programas que ha solicitado.
Instalación de Microsoft Windows Server 2008 R2 Para instalar Microsoft Windows Server 2008 R2, use uno de los métodos siguientes: • "Instalación de Microsoft Windows Server 2008 R2 mediante Dell Unified Server Configurator (USC)" en la página 156 • "Instalación de Microsoft Windows Server 2008 R2 mediante el soporte multimedia Dell Systems Management Tools and Documentation" en la página 159 • "Instalación de Microsoft Windows Server 2008 R2 mediante el soporte multimedia del sistema operativo" en la
• Cree un soporte (disquete, unidad USB, CD o DVD) que contenga los controladores de dispositivo. NOTA: este procedimiento sólo es válido si se utiliza el soporte multimedia del sistema operativo para instalar Microsoft Windows Server 2008 R2. Instalación de Microsoft Windows Server 2008 R2 mediante Dell Unified Server Configurator (USC) NOTA: Dell USC sólo es compatible con la última generación de servidores. Asegúrese de que su servidor cuenta con esta compatibilidad.
6 Seleccione Go directly to OS Deployment (Pasar directamente a la implementación del sistema operativo). Si aún no se ha configurado RAID, hágalo en este momento. 7 Haga clic en Next (Siguiente). Aparece la ventana Select Operating System (Seleccionar sistema operativo), en la que se muestra una lista de los sistemas operativos compatibles. 8 Elija Microsoft Windows Server 2008 R2 y haga clic en Next (Siguiente).
16 Lea detenidamente la información. Si está de acuerdo con toda la información, seleccione I accept the license terms (Acepto las condiciones de la licencia) y haga clic en Next (Siguiente). 17 En la pantalla Which Type of Installation Do You Want (¿Qué tipo de instalación desea?), seleccione la opción Custom (advanced) (Personalizada [avanzada]) si no está seleccionada.
19 Haga clic en OK (Aceptar) en la pantalla The user’s password must be set before you login for the first time (Se debe definir la contraseña del usuario antes de iniciar sesión por primera vez). 20 En la pantalla Administrator (Administrador), introduzca la contraseña, confírmela y haga clic en la flecha derecha. Aparece el mensaje siguiente: Your password has been changed (Se ha cambiado su contraseña). 21 Haga clic en OK (Aceptar).
3 Inserte el soporte multimedia Dell Systems Management Tools and Documentation en la unidad óptica. 4 Pulse cuando se le solicite para ejecutar la utilidad de configuración. Aparece la pantalla BIOS Settings (Configuración del BIOS). 5 Vaya al campo Boot Sequence (Secuencia de arranque) mediante las teclas de flecha y pulse . 6 Configure la unidad de CD-ROM para que sea la primera opción de arranque y pulse para salir de la pantalla BIOS Settings (Configuración del BIOS).
Aparecerá la pantalla Select RAID Configuration (Seleccionar configuración RAID). Si se ha configurado RAID, en la pantalla se muestran los detalles de la configuración RAID existente. 12 Seleccione Retain existing configuration on the system (Conservar la configuración existente en el sistema). Si aún no se ha configurado RAID, hágalo en este momento y haga clic en Continue (Continuar).
Se abre la ventana License Agreement (Contrato de licencia). Lea detenidamente la información. Si está de acuerdo con toda la información, seleccione I accept the license terms (Acepto las condiciones de la licencia) y haga clic en Next (Siguiente). 20 En la pantalla Which Type of Installation Do You Want (¿Qué tipo de instalación desea?), haga clic en la opción Custom (advanced) (Personalizada [avanzada]) si no está seleccionada.
24 En la pantalla The user’s password must be set before you login for the first time (Se debe definir la contraseña del usuario antes de iniciar sesión por primera vez), haga clic en OK (Aceptar). 25 En la pantalla Administrator (Administrador), introduzca la contraseña, confírmela y haga clic en la flecha derecha. Aparece el mensaje siguiente: Your password has been changed (Se ha cambiado su contraseña). 26 Haga clic en OK (Aceptar).
4 Seleccione el controlador que desee en la lista de controladores que se muestra. Seleccione el archivo zip autoextraíble y haga clic en Run (Ejecutar). Copie el controlador en una unidad de disquete, un CD, un DVD o una unidad USB. Repita este paso para todos los controladores necesarios.
Uso de la imagen de disquete de DRAC Instale los controladores de almacenamiento masivo de Dell mediante las imágenes de disquete de Dell Remote Access Controller (DRAC) 4, DRAC 5 o iDRAC disponibles en la página web de asistencia de Dell (support.dell.com). Para obtener más información sobre cómo configurar el soporte multimedia de la unidad de disquete virtual, consulte la documentación sobre DRAC/iDRAC entregada con el sistema.
4 Aparece el mensaje siguiente: Windows is Loading Files (Windows está cargando archivos) Una vez cargados los archivos, aparece el asistente para la instalación de Windows. 5 En la pantalla Install Windows (Instalar Windows), seleccione los valores adecuados para Language (Idioma), Time & Currency (Hora y moneda) y Keyboard (Teclado). Haga clic en Next (Siguiente). 6 En la pantalla Windows Server 2008 R2, haga clic en Install Now (Instalar ahora).
Para crear una partición y comenzar la instalación: a Haga clic en New (Nueva). b Especifique el tamaño de la partición en MB y haga clic en Apply (Aplicar). Aparece el mensaje Windows might create additional partition for system files (Puede que Windows cree una partición adicional para los archivos del sistema). c Haga clic en OK (Aceptar). NOTA: el tamaño mínimo recomendado para la partición principal es 40 GB.
Tareas iniciales de configuración y Server Manager Tras iniciar sesión, aparece la pantalla Initial Configuration Tasks (Tareas de configuración inicial). Puede realizar varias tareas para proporcionar información del sistema, actualizarlo y personalizarlo. Tras cerrar la ventana Initial Configuration Tasks (Tareas de configuración inicial), aparece la pantalla Server Manager (Administrador de servidores).
Esquema de registro de arranque maestro El esquema de registro de arranque maestro (MBR) es un esquema de partición heredado que pueden utilizar la mayoría de sistemas operativos. El espacio de almacenamiento de datos total de una unidad de disco duro se divide en al menos cuatro particiones principales. Esquema de tabla de partición GUID El esquema de tabla de partición GUID (GPT) es un nuevo estándar para la estructura de la tabla de partición de una unidad de disco duro física.
Selección de esquemas de partición Las principales consideraciones que debemos tener en cuenta para elegir entre los esquemas de partición son: • Tamaño de unidad de disco duro • Versión de sistema operativo • Herramientas de software utilizadas en el sistema operativo El esquema de partición MBR se utiliza en las versiones antiguas de los sistemas operativos de Microsoft. El esquema de partición MBR admite un tamaño de volumen inferior a 2 TB.