Important information

24 Important Information
Windows Deployment Services (WDS) Server Does Not List the
Language String and Build Number of the Operating System Image While
Installing Through a Remote Server
Dell Ref: 72794
When you boot a remote server to WDS to install the Windows Server 2008
SP2 operating system, you can select the operating system based on the
images available on the WDS server. Presently, the build number is not
displayed on the WDS server. Thus, you cannot uniquely identify the
operating system image.
To workaround this issue, you must rename builds as per your convenience.
Terminal Services Manager Does Not Reflect Correct Connection Status
Dell Ref: 78277
While running the Terminal Services Manager in the PowerEdge system, if
you physically disconnect any of the server systems connected to the Services
Manager, the server is still listed and remains listed even after screen refresh.
To remove the server name from the list, you must manually remove the
server system from the group. This is a known issue with the Windows Server
2008 SP2 operating system.
I/O Requests are Timed Out if a Reset is Issued in a Multi-Path or
Multi-Host Configuration
Dell Ref: 139251
In a multi-path or multi-host configuration, if a reset is issued from another
path/host while I/O requests are being sent on that particular path/host, the
requests may not be carried out. The next I/O issued from this path/host is
returned with the following check condition:
Unit Attention (ASC/ASCQ = 29h/00h).
When Storport receives the Unit Attention, it should ideally know that an
outstanding I/O request has not been carried out and it should try to
abort/retry them. Instead, outstanding I/Os are timed out.
This is a known issue with the Windows Server 2008 SP2 operating system.
imp_info.book Page 24 Monday, March 21, 2011 1:52 PM