Microsoft Windows Server 2012 pour les systèmes Dell PowerEdge Instructions d'installation et informations importantes
Remarques, précautions et avertissements REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser l'ordinateur. PRÉCAUTION : Une PRÉCAUTION indique un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. AVERTISSEMENT : Un AVERTISSEMENT indique un risque d'endommagement du matériel, de blessure corporelle ou de mort. © 2012 Dell Inc.
Table des matières Remarques, précautions et avertissements..............................................................................2 Chapitre 1: Introduction.................................................................................................................5 Configuration du système d'exploitation Microsoft Windows Server 2012 préinstallé ...........................................5 Configuration du système d'exploitation Windows Server 2012 Éditions Datacenter, Standard et Foundation....
Introduction 1 Ce document fournit des informations sur les opérations suivantes : • Installation du système d'exploitation Microsoft Windows Server 2012 pour Datacenter, éditions Standard, Foundation et Essentials • Partitionnement du disque dur Configuration du système d'exploitation Microsoft Windows Server 2012 préinstallé Cette section contient des informations sur les procédures requises pour terminer la configuration du système d'exploitation Windows Server 2012 préinstallé sur votre système.
REMARQUE : Le mot de passe doit être conforme aux règles de complexité des mots de passe. Pour plus d'informations sur ces règles, voir la documentation du système d'exploitation. Le mot de passe est modifié et vous pouvez vous connecter à l'aide du nouveau mot de passe. Un fichier d'aide personnalisé Dell s'affiche avec différents scripts/ajouts de valeur ajoutée fournis avec le système. 7. Lisez le fichier d'aide puis cliquez sur Continuer. 8.
Installation de Microsoft Windows Server 2012 Éditions Datacenter, Standard, Foundation et Essentials 2 Vous pouvez utiliser l'une des méthodes suivantes si aucun système d'exploitation n'est installé sur votre serveur ou si vous souhaitez réinstaller le système d'exploitation : • Utilisation du média Dell Systems Management Tools and Documentation (Documentation et outils de gestion des systèmes Dell) • Utilisation du média du système d'exploitation REMARQUE : Bien que Dell ne prenne actuellement pas
Utilisation du média Dell Systems Management Tools and Documentation (Documentation et outils de gestion du système Dell) PRÉCAUTION : Effectuez une sauvegarde de toutes les données du système avant d'installer ou de mettre à niveau le système d'exploitation. REMARQUE : Dell OpenManage 7.2 fournit les derniers pilotes pour Windows Server 2012 et une prise en charge totale de Windows Server 2012 Éditions Standard, Foundation et Essentials.
L'écran Select RAID Configuration (Sélectionner la configuration RAID) s'affiche. Si RAID a été configuré, l'écran affiche les détails relatifs à la configuration RAID existante. 13. Sélectionnez Retain existing configuration on the system (Conserver la configuration RAID existante sur le système). Si RAID n'est pas configuré, vous pouvez le configurer au cours de cette étape puis cliquez sur Continue (Continuer).
Pour garantir que toutes les fonctionnalités Windows fonctionnent correctement, Windows peut créer une partition supplémentaire pour les fichiers système c. Cliquez sur OK. REMARQUE : La taille de la partition minimale de la partition principale est de 50 Go. Si vous installez une mémoire supplémentaire dans votre système, vous pouvez demander un espace pour la partition principale supplémentaire pour accueillir le fichier d'échange et la mise en veille prolongée.
d'informations sur l'installation du lecteur de disquette virtuelle, reportez-vous à la documentation DRAC/iDRAC fournie avec le système. REMARQUE : Vous ne pouvez utiliser cette image de disquette pour l'installation des pilotes que si un contrôleur DRAC/iDRAC est installé et configuré sur le système. Création de disque de pilotes sur un lecteur USB pour le chargement automatique de tous les pilotes Créez directement $WinPEdriver$ dans le répertoire racine de votre périphérique USB.
8. Si vous en acceptez les conditions, sélectionnez J'accepte les termes du contrat de licence, puis cliquez sur Suivant. 9. Dans l'écran Quel type d'installation voulez-vous effectuer, cliquez sur Personnalisée : installer uniquement Windows (option avancée), si elle n'est pas déjà sélectionnée. 10. Dans l'écran Où souhaitez-vous installer Windows ?, indiquez la partition sur laquelle vous souhaitez installer le système d'exploitation. Pour créer une partition et commencer l'installation : a.
Partitionnement d'un disque dur Le partitionnement du disque vous permet de diviser un disque dur physique en plusieurs disques durs virtuels. Chaque disque dur virtuel est appelé partition. Il existe deux modèles de partitionnement du disque dur : • Modèle MBR • Modèle GPT Modèle MBR Le modèle MBR est le modèle historique de partitionnement des disques durs. Il peut être utilisé par la plupart des systèmes d'exploitation.