Owner's manual
Table Of Contents
- Contents
- Your Dell Projector
- Connecting Your Projector
- Using Your Projector
- Turning Your Projector On
- Turning Your Projector Off
- Adjusting the Projected Image
- Adjusting the Projector Focus
- Adjusting Projection Image Size
- Using the Control Panel
- Using the Remote Control
- Installing the Remote Control Battery
- Operating Range with Remote Control
- Using the On-Screen Display
- Multimedia Introduction
- Photo Format
- Video Format
- Music Format
- How to set-up File Type for Multimedia with USB
- How to set-up File Type for Multimedia with SD Card
- How to set-up File Type for Multimedia with Internal Memory
- Office Viewer for the USB, SD, and Internal Memory
- Buttons Introduction
- Multimedia SETUP for USB, SD Card, and Internal Memory
- Intel® Wireless Display (WiDi) Installation
- Wi-Fi Display Installation
- Managing the Projector From Web Management
- Make Application Token
- Troubleshooting Your Projector
- Specifications
- Contacting Dell
- Appendix: Glossary
4
Troubleshooting Your Projector
If you experience problems with your projector, see the following
troubleshooting tips. If the problem persists, contact Dell (see Contacting
Dell™ on page 79).
Problem
No image appears on the
screen
Fn
F8
CRT/LCD
Possible Solution
•
Ensure that the projector is turned on.
•
Ensure that you have chosen the correct
input source on the INPUT SOURCE
menu.
•
Ensure the external graphics port is
enabled. If you are using a Dell laptop
computer, press (Fn+F8). For
other computers, see your respective
documentation. If images are not
displayed properly, please upgrade the
video driver of your computer. For Dell
computers, see support.dell.com.
•
Ensure that all the cables are securely
connected. See "Connecting Your
Projector" on page 7.
•
Ensure that the pins of the connectors
are not bent or broken.
•
Use
Test Pattern
in the
Projector
Settings of the Advanced Settings
menu. Ensure that the colors of the test
pattern are correct.
Troubleshooting Your Projector 71