Dell 多设备无线键盘和鼠标组合 KM7120W 用户指南 组合装置型号:KM7120W 监管型号 KB7120Wc/MS5320Wc/RG-1216
备注、小心和警告 备注:备注表示有助于您更好使用计算机的重要信息。 小心: 小心表示如果未遵守说明可能会造成硬件损坏或数据丢失。 警告: 警告表示可能造成财产损失、人身伤害或死亡。 版权© 2020 Dell Inc. 保留所有权利。Dell、EMC 和其他商标是 Dell Inc.或其子公司的商标。其他商 标可能是其各自所有者的商标。 2020 – 04 Rev.
目录 包装清单....................................................................... 4 功能特点....................................................................... 5 鼠标 ......................................................................................... 5 顶视图 ...................................................................................................... 5 底视图 ...................................................................................................... 6 键盘 ....................................
包装清单 1 无线键盘 2 无线鼠标 3 文档 4 │ 包装清单 4 加密狗 5 AA 型电池(3)
功能特点 鼠标 顶视图 1 左按钮 2 右按钮 3 滚动轮 4 向前按钮 5 向后按钮 6 连接模式灯 • 白色 LED 闪烁:设备未连接到计算机 • LED 灯亮起白色:设备已连接到计算机 • 琥珀色 LED 闪烁:设备电池电量不足 7 连接模式按钮 8 PPID 标签 功能特点 │ 5
鼠标 底视图 1 光学传感器 6 │ 功能特点 2 电源开关
键盘 顶视图 底视图 1 电源开关 4 电池盖 2 连接模式灯 • 白色 LED 闪烁:设备未连接到计算机 • LED 灯亮起白色:设备已连接到计算机 • 琥珀色 LED 闪烁:设备电池电量不足 5 PPID 标签 3 连接模式开关按钮 功能特点 │ 7
Dell Peripheral Manager Dell Peripheral Manager软件可以让您执行以下操作: 通过Action(操作)选项卡将程序快捷方式分配给设备可编程按钮或按键。 通过Info(信息)选项卡查看设备信息,如固件版本和电池状态。 升级设备上的最新固件更新。 通过RF USB加密狗或直接通过蓝牙将其他设备与计算机配对。 有关更多信息,请参阅 www.dell.
设置无线鼠标 安装电池 1. 找到鼠标盖侧面的插槽。用指尖将盖撬开。 2. 从其槽中取出 USB 加密狗。 3.
4. 装回电池盖。 5.
配对无线鼠标 Dell 无线鼠标可以与使用 USB 和蓝牙的设备配对。您可以在笔记本电脑、台式 机和兼容的移动设备之间配对和切换。 与 USB 加密狗配对 备注:您可以使用 Dell 通用配对将设备连接到无线鼠标。 1. 将 Dell 通用 USB 加密狗安装到计算机的 USB 端口。 备注: 射频设备已在工厂预配对。 笔记本电脑 2. 鼠标上的连接模式指示灯( 台式电脑 )亮起表示 Dell 通用配对,然后熄灭。 3.
使用蓝牙配对鼠标 您可以使用蓝牙将最多两个设备连接到无线鼠标。 1. 按鼠标上的连接模式按钮两次(3 秒内),直到连接模式指示灯( 二个蓝牙连接。 2. 连接模式指示灯( )闪烁 3 分钟,指示鼠标处于配对模式。 3. 将鼠标与支持蓝牙的计算机配对。 a. 在 Windows 搜索中,键入蓝牙。 b. 单击蓝牙和其它设备设置。设置窗口出现。 c.
备注:如果未列出鼠标 MS5320W,请确保在鼠标上启用配对模式。 4.
使用蓝牙配对设备 备注:您可以使用蓝牙将第三个设备连接到无线鼠标。 1. 按鼠标上的连接模式按钮两次(3 秒内),直到连接模式指示灯( 三个蓝牙连接。 2. 第三个蓝牙连接指示灯( )开始闪烁,以确认配对模式已启用。 3. 将鼠标与支持蓝牙的计算机配对。 a. 在 Windows 搜索中,键入蓝牙。 b. 单击蓝牙和其它设备设置。设置窗口出现。 c.
备注:如果未列出鼠标 MS5320W,请确保在鼠标上启用配对模式。 4.
设置无线键盘 1. 拆下电池盖。 2. 将 AA 电池装入电池槽。 3.
4.
配对无线键盘 Dell 无线键盘可以与使用 USB 和蓝牙的设备配对。您可以在笔记本电脑、台式 机和兼容的移动设备之间配对和切换。 与 USB 加密狗配对 备注:您可以使用 Dell 通用配对将设备连接到无线键盘 1. 将 Dell 通用 USB 加密狗安装到计算机的 USB 端口。 备注:射频设备已在工厂预配对。 笔记本电脑 台式电脑 2.
3. 键盘已与 USB 设备配对。 设备 1 使用蓝牙配对无线键盘 您可以使用蓝牙将最多两个设备连接到无线键盘。 1. 按键盘上的连接模式按钮两次(3 秒内),直到连接模式指示灯( 二个蓝牙连接。 )亮起指示已选择第 2. 将键盘与支持蓝牙的计算机配对。 a. 在 Windows 搜索中,键入蓝牙。 B. 单击蓝牙和其它设备设置。设置窗口出现。 c.
备注:如果未列出 Dell Mobile Wireless Mouse MS3320W,请确保在鼠标上启用配对 模式。 3.
使用蓝牙配对设备 备注:您可以使用蓝牙将第三个设备连接到无线键盘。 1. 按键盘上的连接模式按钮两次(3 秒内),直到连接模式指示灯( 第三个蓝牙连接。 )亮起指示已选择 2. 将键盘与支持蓝牙的计算机配对。 a. 在 Windows 搜索中,键入蓝牙。 B. 单击蓝牙和其它设备设置。设置窗口出现。 c.
3.
规格 一般 键盘型号 MS5320W 连接类型 2.4 GHz 无线和蓝牙双模技术 支持的操作系统 (2.4 GHz) 支持的操作系统(蓝牙) • • • • • Windows 10/8/7/XP/ Server 2008/Server 2012 Linux 6.x、Ubuntu、Free DOS、Neokylin、 Red Hat Chrome 和 Android MAC OS • • • • Windows 10/8 Chrome 和 Android MAC OS Linux 6.x、Ubuntu、Neokylin、Red Hat 电力 操作电压 0.9 V – 1.6 V 所需电池 一个 AA 碱性电池 无线电传输 双向通信 所需电池范围 最大 10 米 物理特性 重量(不含电池) 84 g 尺寸: • 长度 114.50 mm (4.51 英寸) • 宽度 69.70 mm (2.74 英寸) • 高度 41.60 mm (1.
一般 鼠标型号 KB7120W 连接类型 2.4 GHz 无线和蓝牙双模技术 支持的操作系统 (2.4 GHz) 支持的操作系统(蓝牙) • • • Windows 10/8/7/XP/Vista Server 2003/ Server 2008/Server 2012 Linux 6.x、Ubuntu、Free DOS、Neokylin、 Red Hat Chrome 和 Android MAC OS • • • • Windows 10/8 Chrome 和 Android MAC OS Linux 6.x、Ubuntu、Neokylin、Red Hat • 电力 操作电压 2.2 V – 3.0 V 所需电池 两个 AA 碱性电池 无线电传输 双向通信 所需电池范围 最大 10 米 物理特性 重量(不含电池) 500.90 g 尺寸: • 长度 122mm (4.80 英寸) • 宽度 363.40 mm (14.31 英寸) • 高度 35.52 mm (1.
故障排除 问题 可能的原因 可能的解决方案 无法使用鼠标/键 盘 鼠标通电时,鼠标顶部 1. 检查电池是否正确插入。 的 LED 指示灯不亮 电池“+”和“-”极应与电池 槽标签上所示的极一致。 2. 检查电池电量。 • 如果鼠标使用可充电电池, 请确保电池已充满电。 • 如果电池电量耗尽,就换上 新电池。 3. 关闭鼠标/键盘后再打开。 检查电池状态指示灯是否闪烁 琥珀色,这表示电池电量低。 如果电池已完全耗尽,电池状 态指示灯将不会亮起。 4. 确保 USB 加密狗直接连接到 计算机。 避免使用端口复制器、USB 集 线器等。 5.
问题 可能的原因 可能的解决方案 无法使用蓝牙将 鼠标/键盘与计算 机配对 1. 检查电池电量。 将鼠标连接到计算机 时,计算机上的蓝牙图 • 如果鼠标/键盘使用可充电 标不亮。 电池,请确保电池已充满 电。 • 如果电池电量耗尽,就换上 新电池。 2. 关闭鼠标/键盘后再打开。检查 电池状态指示灯是否闪烁琥珀 色,这表示电池电量低。如果 电池已完全耗尽,电池状态指 示灯将不会亮起。 3. 重新启动计算机。 4. 检查操作系统是 Windows 10/Windows 8/ Chrome/Android。 5. 确保在计算机中将鼠标/键盘 设置为蓝牙低能耗(BLE)模 式。有关详情,请参阅计算机 附带的文档。 6.
问题 可能的原因 可能的解决方案 鼠标指针不移动 鼠标指针没有反应 1. 检查电池电量。 左/右按钮不起作 用 按下鼠标左按钮或右 按钮时无响应 • 如果鼠标使用可充电电池, 请确保电池已充满电。 • 如果电池电量耗尽,就换上 新电池。 2. 关闭鼠标后再打开。 检查电池状态指示灯是否闪烁 琥珀色 10 次,这表示电池电 量低。如果电池已完全耗尽, 电池状态指示灯将不会亮起。 3. 重新启动计算机。 无法将鼠标/键盘 与计算机配对 将鼠标/键盘与计算机 配对时收到无线配对 错误消息 1.
问题 可能的原因 可能的解决方案 无法将鼠标/键盘 与计算机配对 将鼠标/键盘与计算机 配对时收到无线配对 错误消息 2. 关闭鼠标/键盘后再打开。 检查电池状态指示灯是否闪烁 琥珀色 10 次,这表示电池电 量低。如果电池已完全耗尽, 电池状态指示灯将不会亮起。 3. 重新启动计算机。 无线连接丢失 以前配对的鼠标在计 算机上不再工作 1. 确保 USB 加密狗直接连接到 计算机。 避免使用端口复制器、USB 集 线器等。 2.
法定信息 保修 有限保修和退货政策 Dell 品牌产品享受三年有限硬件保修。如果与 Dell 系统一起购买,它将遵循系统 保修。 针对美国客户: 购买和使用本产品必须遵守 Dell.com/terms 上的 Dell 的最终用户协议。本文档 包含约束性仲裁条款。 针对欧洲、中东和非洲客户: 销售和使用的 Dell 品牌产品享有适用的国家消费者法律权利,并须遵守您已签署 的任何零售商销售协议的条款(在您与零售商间适用)以及 Dell 最终用户合同条 款。 Dell 还可能提供额外硬件保修 - 有关 Dell 最终用户合同和保修条款的详细信息, 请访问 Dell.com,从“主页”底部的列表中选择您的国家/地区,然后单击最终 用户条款的“条款和条件”链接或保修条款的“支持”链接。 针对非美国客户: 销售和使用的 Dell 品牌产品享有适用的国家消费者法律权利,并须遵守您已签署 的任何零售商销售协议的条款(在您与零售商间适用)以及 Dell 保修条款。Dell 还可以提供额外的硬件保修 – 有关 Dell 保修条款的详细信息, 请访问 Dell.