Deployment Guide

61
A.1 Commands
boot top level command
Examples
JFTP0Z1_console# boot
boot <subcommand>
possible subcommands:
system select system partition to boot
boot system
Use the boot system command to specify the system image that the switch loads at bootup.
Syntax
boot system <image to boot>
boot system <backup>
User Guidelines
Use the show bootvar or show version commands to find out which images are in the active and backup
partitions.
Examples
boot system <active>
Tells switch to load from image in active partition
boot system <backup>
Tells switch to load from image in backup partition
clear top level command
The clear top level command shows what subcommands are available from it.
Examples
JFTP0Z1_console# clear
clear <subcommand>
possible subcommands:
counters clear all interface statistics counters
openflow clear openflow data structures
clear counters
Use the clear counters command to clear all interface statistics counters.
Examples
JFTP0Z1_console# clear counters
This operation may take a few minutes. The console prompt will return when the operation is complete
Port Stats cleared