Administrator Guide
DellEMC(conf)#
DellEMC(conf)#line vty 0 9
DellEMC(config-line-vty)#login authentication tacacsmethod
DellEMC(config-line-vty)#
DellEMC(config-line-vty)#access-class deny10
DellEMC(config-line-vty)#end
(same applies for radius and line authentication)
VTY MAC-SA Filter Support
supports MAC access lists which permit or deny users based on their source MAC address.
With this approach, you can implement a security policy based on the source MAC address.
To apply a MAC ACL on a VTY line, use the same access-class command as IP ACLs.
The following example shows how to deny incoming connections from subnet 10.0.0.0 without displaying a login prompt.
Example of Configuring VTY Authorization Based on MAC ACL for the Line (Per MAC Address)
DellEMC(conf)#mac access-list standard sourcemac
DellEMC(config-std-mac)#permit 00:00:5e:00:01:01
DellEMC(config-std-mac)#deny any
DellEMC(conf)#
DellEMC(conf)#line vty 0 9
DellEMC(config-line-vty)#access-class sourcemac
DellEMC(config-line-vty)#end
Role-Based Access Control
With Role-Based Access Control (RBAC), access and authorization is controlled based on a user’s role. Users are granted permissions
based on their user roles, not on their individual user ID. User roles are created for job functions and through those roles they acquire the
permissions to perform their associated job function.
This chapter consists of the following sections:
• Overview
• Privilege-or-Role Mode Versus Role-only Mode
• Configuring Role-based Only AAA Authorization
• System-Defined RBAC User Roles
• Creating a New User Role
• Modifying Command Permissions for Roles
• Adding and Deleting Users from a Role
• Role Accounting
• Configuring AAA Authentication for Roles
• Configuring AAA Authorization for Roles
• Configuring an Accounting for Roles
• Applying an Accounting Method to a Role
• Displaying Active Accounting Sessions for Roles
• Configuring TACACS+ and RADIUS VSA Attributes for RBAC
• Displaying User Roles
• Displaying Accounting for User Roles
• Displaying Information About Roles Logged into the Switch
• Display Role Permissions Assigned to a Command
Overview of RBAC
With Role-Based Access Control (RBAC), access and authorization is controlled based on a user’s role. Users are granted permissions
based on their user roles, not on their individual user ID. User roles are created for job functions and through those roles they acquire the
permissions to perform their associated job function. Each user can be assigned only a single role. Many users can have the same role.
The Dell EMC Networking OS supports the constrained RBAC model. With a constrained RBAC model, you can inherit permissions when
you create a new user role, restrict or add commands a user can enter and the actions the user can perform. This allows for greater
716
Security