Administrator Guide

Figure 115. Creating a new stack
In the above example, stack unit 1 is the master management unit, stack unit 2 is the standby unit. The cables are connected to each unit.
Reload each unit in the stack. After the reload is complete, the four units come up as a stack with unit 1 as the management unit, unit 2 as
the standby unit, and the remaining units as stack-members. All units in the stack can be accessed from the management unit.
NOTE:
Before executing show commands, you must wait for 10 to 15 seconds for the download-agent process to start.
To view the stack unit information after the reload, use the show system brief command.
DellEMC#show system brief
Stack MAC : 34:17:17:18:19:1e
Reload-Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
------------------------------------------------------------------------------------
1 Member online S3124F S3124F 1-0(0-4679) 30
2 Member online S3124 S3124 1-0(0-4679) 30
3 Member online S3124 S3124 1-0(0-4679) 30
4 Member online S3148P S3148P 1-0(0-4679) 54
5 Standby online S3148 S3148 1-0(0-4679) 54
6 Member online S3148P S3148P 1-0(0-4679) 54
7 Member online S3124F S3124F 1-0(0-4679) 30
8 Member online S3124P S3124P 1-0(0-4679) 30
9 Member online S3124F S3124F 1-0(0-4679) 30
10 Member online S3148 S3148 1-0(0-4679) 54
11 Member online S3124F S3124F 1-0(0-4679) 30
12 Management online S3148 S3148 1-0(0-4679) 54
-- Module Info --
Unit Module No Status Module Type Ports
---------------------------------------------------------------------------
1 1 not present No Module 0
2 1 not present No Module 0
804
Stacking