Setup Guide
Maximum concurrent sessions for the user reached.
Current sessions for user admin:
Line Location
2 vty 0 10.14.1.97
3 vty 1 10.14.1.97
4 vty 2 10.14.1.97
5 vty 3 10.14.1.97
Kill existing session? [line number/Enter to cancel]:
Enabling Secured CLI Mode
The secured CLI mode prevents the users from enhancing the permissions or promoting the privilege levels.
• Enter the following command to enable the secured CLI mode:
CONFIGURATION Mode
secure-cli enable
After entering the command, save the running-conguration. Once you save the running-conguration, the secured CLI mode is enabled.
If you do not want to enter the secured mode, do not save the running-conguration. Once saved, to disable the secured CLI mode, you
need to manually edit the startup-conguration le and reboot the system.
Log Messages in the Internal Buer
All error messages, except those beginning with %BOOTUP (Message), are log in the internal buer.
For example, %BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Conguration Task List for System Log Management
There are two conguration tasks for system log management:
• Disable System Logging
• Send System Messages to a Syslog Server
Disabling System Logging
By default, logging is enabled and log messages are sent to the logging buer, all terminal lines, the console, and the syslog servers.
To disable system logging, use the following commands.
• Disable all logging except on the console.
CONFIGURATION mode
no logging on
• Disable logging to the logging buer.
CONFIGURATION mode
no logging buffer
• Disable logging to terminal lines.
CONFIGURATION mode
no logging monitor
• Disable console logging.
CONFIGURATION mode
76
Management