Users Guide

The following example allows the security administrator (secadmin) to access Interface mode.
Dell(conf)#role configure addrole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure addrole secadmin interface
Example: Allow Security Administrator to Access Only 10-Gigabit Ethernet Interfaces
The following example allows the security administrator (secadmin) to only access 10-Gigabit Ethernett interfaces and then shows that
the secadmin, highlighted in bold, can now access Interface mode. However, the secadmin can only access 10-Gigabit Ethernet
interfaces.
Dell(conf)#role configure addrole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure addrole secadmin interface tengigabitethernet
Dell(conf)#show role mode configure interface
Role access: netadmin, secadmin, sysadmin
Example: Verify that the Security Administrator Can Access Interface Mode
The following example shows that the secadmin role can now access Interface mode (highlighted in bold).
Role Inheritance Modes
netoperator
netadmin Exec Config Interface Router IP RouteMap Protocol MAC
secadmin Exec Config Interface Line
sysadmin Exec Config Interface Line Router IP RouteMap Protocol MAC
Example: Remove Security Administrator Access to Line Mode.
The following example removes the secadmin access to LINE mode and then veries that the security administrator can no longer
access LINE mode, using the show role mode configure line command in EXEC Privilege mode.
Dell(conf)#role configure deleterole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure deleterole secadmin line
Dell(conf)#do show role mode ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Dell(conf)#do show role mode configure line
Role access:sysadmin
Example: Grant and Remove Security Administrator Access to Congure Protocols
By default, the system dened role, secadmin, is not allowed to congure protocols. The following example rst grants the secadmin
role to congure protocols and then removes access to congure protocols.
Dell(conf)#role configure addrole secadmin protocol
Dell(conf)#role configure deleterole secadmin protocol
Example: Resets Only the Security Administrator role to its original setting.
The following example resets only the secadmin role to its original setting.
Dell(conf)#no role configure addrole secadmin protocol
Example: Reset System-Dened Roles and Roles that Inherit Permissions
736
Security