Administrator Guide

Table 38. Optional TLV Types (continued)
Type TLV Description
port belongs (and the untagged VLAN to
which a port belongs if the port is in
Hybrid mode).
127 Protocol Identity Indicates the protocols that the port can
process. Dell EMC Networking OS does
not currently support this TLV.
IEEE 802.3 Organizationally Specific
TLVs
127 MAC/PHY Configuration/Status Indicates the capability and current
setting of the duplex status and bit rate,
and whether the current settings are the
result of auto-negotiation. This TLV is
not available in the Dell EMC Networking
OS implementation of LLDP, but is
available and mandatory (non-
configurable) in the LLDP-MED
implementation.
127 Power via MDI Dell EMC Networking supports the
LLDP-MED protocol, which recommends
that Power via MDI TLV be not
implemented, and therefore Dell EMC
Networking implements Extended Power
via MDI TLV only.
127 Link Aggregation Indicates whether the link is capable of
being aggregated, whether it is currently
in a LAG, and the port identification of
the LAG. Dell EMC Networking OS does
not currently support this TLV.
127 Maximum Frame Size Indicates the maximum frame size
capability of the MAC and PHY.
TIA-1057 (LLDP-MED) Overview
Link layer discovery protocol — media endpoint discovery (LLDP-MED) as defined by ANSI/ TIA-1057— provides additional
organizationally specific TLVs so that endpoint devices and network connectivity devices can advertise their characteristics and
configuration information; the OUI for the Telecommunications Industry Association (TIA) is 00-12-BB.
● LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge can communicate using IP and uses
the LLDP-MED framework.
● LLDP-MED Network Connectivity Device — any device that provides access to an IEEE 802 LAN to an LLDP-MED
endpoint device and supports IEEE 802.1AB (LLDP) and TIA-1057 (LLDP-MED). The Dell EMC Networking system is an
LLDP-MED network connectivity device.
Regarding connected endpoint devices, LLDP-MED provides network connectivity devices with the ability to:
● manage inventory
● manage Power over Ethernet (PoE)
● identify physical location
● identify network policy
LLDP-MED is designed for, but not limited to, VoIP endpoints.
Link Layer Discovery Protocol (LLDP)
453