Users Guide

The except keyword displays text that does not match the specified text. The following example shows this command used in
combination with the show system brief command.
Example of the except Keyword
Dell#show system brief | except 1
Stack MAC : 4c:76:25:e5:49:40
Reload-Type : normal-reload [Next boot : normal-reload]
The find keyword displays the output of the show command beginning from the first occurrence of specified text. The following
example shows this command used in combination with the show system brief command.
Example of the find Keyword
Dell#show system brief | find 0
2 Management online S3124 S3124 9-8(2-65)
30
3 Member not present
4 Member not present
5 Member not present
6 Member not present
-- Module Info --
Unit Module No Status Module Type Ports
---------------------------------------------------------------------------
2 0 not present No Module 0
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
2 1 up UNKNOWN up NA
2 2 absent absent NA
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
--------------------------------------------------------------------------------
2 1 up up 7058 up 7164
Speed in RPM
The display command displays additional configuration information.
The no-more command displays the output all at once rather than one screen at a time. This is similar to the terminal length
command except that the no-more option affects the output of the specified command only.
The save command copies the output to a file for future reference.
NOTE
: You can filter a single command output multiple times. The save option must be the last option entered. For example:
Dell# command | grep regular-expression | except regular-expression | grep other-regular-
expression | find regular-expression | save.
Multiple Users in Configuration Mode
Dell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.
A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP address of
the terminal on which the connection was established. For example:
• On the system that telnets into the switch, this message appears:
% Warning: The following users are currently configuring the system:
User "<username>" on line console0
42
Configuration Fundamentals