Users Guide

Configuring Role-based Only AAA Authorization
You can configure authorization so that access to commands is determined only by the user’s role. If the user has no user role, access to
the system is denied as the user will not be able to login successfully. When you enable role-based only AAA authorization using the aaa
authorization role-only command in Configuration mode, the Dell Networking OS checks to ensure that you do not lock yourself out and
that the user authentication is available for all terminal lines.
Pre-requisites
Before you enable role-based only AAA authorization:
1 Locally define a system administrator user role. This will give you access to login with full permissions even if network connectivity to
remote authentication servers is not available.
2 Configure login authentication on the console. This ensures that all users are properly identified through authentication no matter the
access point.
If you do not configure login the authentication on the console, the system displays an error when you attempt to enable role-based
only AAA authorization.
3 Specify an authentication method list (RADIUS, TACACS+, or Local).
You must specify at least local authentication. For consistency, the best practice is to define the same authentication method list
across all lines, in the same order of comparison; for example VTY and console port.
You could also use the default authentication method to apply to all the LINES (console port, VTY).
NOTE
: The authentication method list should be in the same order as the authorization method list. For example, if
you configure the authentication method list in the following order (TACACS+, local), Dell Networking recommends
that authorization method list is configured in the same order (TACACS+, local).
4 Specify authorization method list (RADIUS, TACACS+, or Local). You must at least specify local authorization.
For consistency, the best practice is to define the same authorization method list across all lines, in the same order of comparison; for
example VTY and console port.
You could also use the default authorization method list to apply to all the LINES (console port, VTY).
If you do not, the following error is displayed when you attempt to enable role-based only AAA authorization.
% Error: Exec authorization must be applied to more than one line to be useful, e.g. console
and vty lines. Could use default authorization method list as alternative.
5 Verify the configuration has been applied to the console or VTY line.
Dell (conf)#do show running-config line
!
line console 0
login authentication test
authorization exec test
exec-timeout 0 0
line vty 0
login authentication test
authorization exec test
line vty 1
login authentication test
authorization exec test
To enable role-based only AAA authorization:
Dell(conf)#aaa authorization role-only
734
Security