Administrator Guide

show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ statistics.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage Information
Field Description
Source QID /Tx
Process
Source Service Identifier
Destination
QID/Rx Process
Destination Service Identifier
Cur Len Current number of messages enqueued
High Mark Highest number of packets in the queue at any time
#of to / Timeout Timeout count
#of Retr /Retries Number of retransmissions
#msg Sent/Msg
Sent/
Number of messages sent
#msg Ackd/Ack
Rcvd
Number of messages acknowledged
Control and Monitoring 133