Administrator Guide

Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
If you enable this command, clients can log in without a password prompt. This command provides two levels of
authentication:
• rhost-authentication is done with the file specified in the ip ssh rhostfile command.
• checking client host-keys is done with the file specified in the ip ssh pub-key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file) to configure host-
based authentication.
Related
Commands
• ip ssh pub-key-file — public keys of trusted hosts from a file.
• ip ssh rhostsfile — trusted hosts and users for rhost authentication.
ip ssh key-size
Configure the size of the server-generated RSA SSHv1 key.
Syntax
ip ssh key-size 512-869
Parameters
512-869 Enter the key-size number for the server-generated RSA SSHv1 key. The range is from
512 to 869. The default is 768.
Defaults Key size 768
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
1370 Security