Administrator Guide

Version Description
Introduced the core-transfer and event-transfer parameters.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
By default, each activity follows a set of default actions using a default schedule. Using this command, you can
customize the set of actions and disable a certain activity.
contact-company
Configure the contact information for the company.
Syntax
contact-company name {company-name}[company-next-name] ... [company-next-name]
To remove the contact company information, use the no contact-company command.
Parameters
company-name Enter the name for the company. If there are multiple words in the name, use optional
additional fields.
company-next-
name
(OPTIONAL) Enter the next components of the company name, up to 5 components are
allowed.
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information
You can configure only one contact-company.
It is not possible to remove the components of the company name. The no form of the command removes the
entire contact-company entry.
This command is optional for SupportAssist service configuration.
contact-person
Configure the contact name for an individual.
Syntax
contact-person [first <first-name>] last <last-name>
To remove the contact person and all their details, use the no contact-person [first <first-name>]
last <last-name> command.
Parameters
first-name (Optional) Enter the first name for the contact person. This is optional provided each
contact person name is unique. To include a space, enter a space within double quotes.
SupportAssist 1519