Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1561

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.4.2.3 Introduced on the S-Series S50.

Commands

• downstream — assigns a port or port-channel to the uplink-state group as a downstream interface.

• uplink-state-group — creates an uplink-state group and enables the tracking of upstream links.

debug uplink-state-group

Enable debug messages for events related to a specified uplink-state group or all groups.

Syntax

debug uplink-state-group [group-id]

To turn off debugging event messages, enter the no debug uplink-state-group [group-id]

command.

Parameters

group-id

Enables debugging on the specified uplink-state group. The valid group-id values are from

1 to 16.

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10.0.2 Introduced on the Z9100–ON.

9.8(2.0) Introduced on the S3100 series.

9.10(0.0) Introduced on the S3148.

9.8(0.0P5) Introduced on the S4048-ON.