Administrator Guide

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
mac-address (Optional) MAC address of a supplicant.
Defaults None
Command Modes
• EXEC
• EXEC privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.2.1 Added the mac-address option on the C-Series and S-Series.
7.6.1.0 Introduced on the C-Series, E-Series, and S-Series.
Usage Information
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details (Port
Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) display for each
supplicant, as shown in the following example.
Example
DellEMC# show dot1x interface gigabitethernet 1/32
802.1x information on Gi 1/32:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: AUTHORIZED(MAC-AUTH-BYPASS)
Re-Authentication: Disable
Untagged VLAN id: 400
Guest VLAN: Enable
Guest VLAN id: 100
Auth-Fail VLAN: Disable
Auth-Fail VLAN id: NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass: Enable
Mac-Auth-Bypass Only: Enable
Tx Period: 3 seconds
Quiet Period: 60 seconds
ReAuth Max: 2
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
802.1X 173