Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

521

522

523

524

525

526

527

528

529

530

To undo the domain name configuration corresponding to a specific VRF, use the no ip domain-name [vrf

vrf-name] name command.

Parameters

vrf

vrf-name

(Optional) Enter the key word vrf and then the name of the VRF to configure the

domain corresponding to that VRF.

name

Enter the name of the domain to be appended to the in complete DNS requests

corresponding to the specified VRF.

Defaults None

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Introduced on the S-Series and Z-Series.

Usage Information Use this command to configure a domain name corresponding to a VRF. This domain is appended to the in

complete DNS requests corresponding to the specified VRF.

Example

DellEMC(conf)# ip domain-name vrf jay dell.com

ip domain-list

Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS requests corresponding to a

specific VRF.

Syntax

ip domain-list [vrf vrf-name] name

To remove a domain name from DNS list, use the no ip domain-list [vrf vrf-name] name

command.