Administrator Guide

Example
DellEMC(conf)# ip host vrf jay dell 1.1.1.1
clear host
Removes one or all dynamically learned host table entries for a specific VRF.
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to delete dynamically
learned host table entries corresponding to that VRF.
host-name Enter the name of the host corresponding to which you want to delete the dynamically
learnt host table entries.
* Enter * to delete all host table entries.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to delete one or all dynamically learned host table entries corresponding to a specific VRF.
Example
DellEMC# clear host vrf jay dell
DellEMC# clear host vrf jay *
526 Dynamic Host Configuration Protocol (DHCP)