Administrator Guide

Over 511B packets: 286 0 pps 0
Over 1023B packets: 2781 0 pps 0
Error statistics:
Input underruns: 0 0 pps 0
Input giants: 0 0 pps 0
Input throttles: 0 0 pps 0
Input CRC: 0 0 pps 0
Input IP checksum: 0 0 pps 0
Input overrun: 0 0 pps 0
Output underruns: 0 0 pps 0
Output throttles: 0 0 pps 0
m - Change mode c - Clear screen
l - Page up a - Page down
T - Increase refresh interval t - Decrease refresh interval
q - Quit
Example (All
Interfaces)
systest-3 Monitor time: 00:01:31 Refresh Intvl.: 2s Time: 03:54:14
Interface Link In Packets [delta] Out Packets
[delta]
Gi 1/1 Down 0 0 0 0
Gi 1/2 Up 61512 52 66160 42
Gi 1/3 Up 63086 20 9405888 24
Gi 1/4 Up 14697471418 2661481 13392989657
2661385
Gi 1/5 Up 3759 3 161959604 832816
Gi 1/6 Up 4070 3 8680346 5
Gi 1/7 Up 61934 34 138734357 72
Gi 1/8 Up 61427 1 59960 1
Gi 1/9 Up 62039 53 104239232 3
Gi 1/10 Up 17740044091 372 7373849244 79
Gi 1/11 Up 18182889225 44 7184747584 138
Gi 1/12 Up 18182682056 0 3682 1
Gi 1/13 Up 18182681434 43 6592378911 144
Gi 1/14 Up 61349 55 86281941 15
Gi 1/15 Up 59808 58 62060 27
Gi 1/16 Up 59889 1 61616 1
Gi 1/17 Up 0 0 14950126 81293
Gi 1/18 Up 0 0 0 0
Gi 1/19 Down 0 0 0 0
Gi 1/20 Up 62734 54 62766 18
Gi 1/21 Up 60198 9 200899 9
Gi 1/22 Up 17304741100 3157554 10102508511
1114221
Gi 1/23 Up 17304769659 3139507 7133354895
523329
m - Change mode c - Clear screen
b - Display bytes r - Display pkts/bytes per sec
l - Page up a - Page down
mtu
Set the link maximum transmission unit (MTU) (frame size) for an Ethernet interface.
Syntax
mtu value
To return to the default MTU value, use the no mtu command.
Parameters
value Enter a maximum frame size in bytes. The range is from 594 to 12000.
Defaults 1554
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
616 Interfaces