Administrator Guide

Example

DellEMC#clear average-power stack-unit 1

Proceed to clear Average power ? Confirm [yes/no]:yes

DellEMC#

clear line

Reset a terminal line.

Syntax

clear line {line-number | console 0 | vty number}

Parameters

line-number

Enter a number for one of the 12 terminal lines on the system. The range is from 0 to 11.

aux 0 Enter the keywords aux 0 to reset the auxiliary port.

console 0 Enter the keywords console 0 to reset the console port.

vty number

Enter the keyword vty then a number to clear a terminal line. The range is from 0 to 9.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

configure

Enter CONFIGURATION mode from EXEC Privilege mode.

Syntax

configure [terminal]

Control and Monitoring