CLI Guide

Version Description
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series and S-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell# show mac-address-table aging-time
Mac-address-table aging time : 1800
Dell#
Related
Commands
• show mac-address-table — display the current MAC address configuration.
show mac accounting destination
Display destination counters for Layer 2 traffic (available on physical interfaces only).
Syntax
show mac accounting destination [mac-address vlan vlan-id]
[interface interface [mac-address vlan vlan-id] [vlan vlan-id]]
[vlan vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
interface interface (OPTIONAL) Enter the keyword interface then the
interface type, slot and port information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display the MAC address assigned to the VLAN. The range is
from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
Layer 2
1049