CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1061

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.12.0 Introduced on the S4810.

Usage Information When you enter no fefd for an interface and fefd-global, FEFD is enabled on

the interface because the no fefd command is not retained in the configuration

file. To keep the interface FEFD disabled when the global configuration changes,

use the

fefd reset command.

Commands

• fefd disable — disable far-end failure detection on an interface.

• fefd reset — enable FEFD globally on the system.

• fefd mode — change FEFD mode on an interface.

fefd disable

Disable FEFD on an interface only. This command overrides the fefd reset command for the interface.

Syntax