CLI Guide

[protocol
[process-id | tag]
ip-address]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted
decimal format of the reverse path forwarding (RPF)
neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the
IP address in dotted decimal format of the RPF neighbor.
the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP
address in dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the
RPF neighbor.
static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal
format of the RPF neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format
of the RPF neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned
to the mroute. The range is from 0 to 255.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related
Commands
• show ip mroute — display the routing table.
Multicast
1143