CLI Guide

Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/3 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/3 IPv6 VRID 1
Usage Information The following describes the show track brief command shown in the Example
below.
Output Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
Dell> show track brief
ResId Resource Parameter State LastChange
1 IP route reachability 10.16.0.0/16 Up 00:01:08
2 Interface line-protocol Ethernet0/2 Down 00:05:00
3 Interface ip routing VLAN100 Up 01:10:05
Related
Commands
show running-config track – display configuration information about tracked
objects.
track interface ip routing – configure object tracking on the routing status of an
IPv4 Layer 3 interface.
track interface line-protocol – configure object tracking on the line-protocol
state of a Layer 2 interface.
track ip route metric threshold – configure object tracking on the threshold of
an IPv4 route metric.
track ip route reachability – configure object tracking on the reachability of an
IPv4 route.
1174
Object Tracking