CLI Guide

distance
Define an administrative distance for particular routes to a specific IP address.
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask
access-list-name] command.
Parameters
weight Specify an administrative distance. The range is from 1 to
255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n
format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up
to 140 characters.
Defaults 110
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)
1205