CLI Guide

Commands

• access-class — restricts the incoming connections to a particular IP address in

an IP access control list (ACL).

• password — specifies a password for users on terminal lines.

Configures the limit of concurrent sessions for all users on console and virtual terminal lines.

Syntax

enable}

no login concurrent-session {limit number-of-sessions | clear—

line enable}

Parameters

limit number-of-

sessions

Sets the number of concurrent sessions that any user can

have on console and virtual terminal lines. The range is from

1 to 12 (10 VTY lines, one console, and one AUX line).

clear-line enable

Enables you to clear your existing sessions.

Defaults Not configured. You can use all the available sessions.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.8(0.0) Introduced on the S4810, S4820, S5000, S6000, S6000-

ON, and Z9500.

Usage Information

You must have either the System Administrator or Security Administrator privileges

to configure login concurrent-session limit or to enable clear-line.

To limit the number of concurrent sessions that any user can have on console,

auxiliary, and virtual terminal lines, use the login concurrent-session limit

number-of-sessions command.

128

Control and Monitoring