CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information
To redistribute the default route (x:x:x:x::x), use the default-information
originate command.
Related
Commands
• default-information originate – configure default external route into OSPFv3.
router-id
Designate a fixed router ID.
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address
command.
Parameters
ip-address
Enter the router ID in the dotted decimal format.
Defaults The router ID is selected automatically from the set of IPv4 addresses configured
on a router.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
1300
Open Shortest Path First (OSPFv2 and OSPFv3)