CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1361

--------- ------------ ------------ ------- ------

-------- ------

Gi 1/1 30.00/0.00 0.00 NO_DEVICE

- high -

Dell#

power inline legacy

Use this command to allocate inline power to the legacy devices on the specified stack unit.

Syntax

power inline legacy stack-unit unit number

To disable the detection of legacy powered devices in a stack unit, use the no

power inline legacy stack-unit unit number command.

Parameters

stack-unit unit

number

Enter the keyword stack-unit and the unit number.

Range is 1–6.

Defaults Enabled

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(2.0) Introduced on the S3100 series.

Usage Information

The power inline legacy command allows the system to detect and allocate

inline power to the legacy devices on a stack unit.

Example

Dell(conf)#power inline legacy stack-unit 1

power inline mode

Use this command to configure PoE power management mode for a specified stack member.