CLI Guide

Parameters
vlan-list Enter the list of secondary VLANs to associate with the
selected primary VLAN. The list can be in comma-delimited
or hyphenated-range format, following the convention for
the range input.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
• private-vlan mode — sets the mode of the selected VLAN to community,
isolated, or primary.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
Private VLAN (PVLAN)
1383