CLI Guide
Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage Information One trace log message is generated for each command. No password information
is saved to this file. A command-history trace log is saved to a file after failover. Dell
Networking TAC analyzes this file to help identify the root cause of it.
Example
Dell# show command-history
[11/20 15:47:22]: CMD-(CLI):[service password-encryption]by
default from console
[11/20 15:47:22]: CMD-(CLI):[service password-encryption
hostname Force10]by
default from console
- Repeated 3 times.
[11/20 15:47:23]: CMD-(CLI):[service timestamps log
datetime]by default from
console
[11/20 15:47:23]: CMD-(CLI):[hostname Force10]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable password 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[username admin password 7
******]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable restricted 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree rstp]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree pvst]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no disable]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 1/1]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 1.1.1.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[ip access-group abc in]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 1/2]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 1/3]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 1/4]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 1/5]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
142
Control and Monitoring