CLI Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information An aggregate output QoS policy applies to all outbound port traffic. An aggregate
output QoS policy can coexist with per-queue output QoS policies. If the rate
shape exists in both aggregate and per-queue qos-policy, minimum of 2 take
effect. Some of all Queue-rate will not exceed aggregate.
Related
Commands
• policy-map-input — creates an input policy map.
• policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
Syntax
policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the no policy-map-input policy-map-
name cpu-qos | [layer2] [cpu-qos] command.
Parameters
policy-map-name Enter the name of the policy map in character format (32
characters maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control
plane traffic only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input
policy to be used to rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
1426
Quality of Service (QoS)