CLI Guide

Remote Monitoring (RMON)

The Dell Networking OS remote monitoring (RMON) is implemented on the platform.

Dell Networking OS RMON is based on IEEE standards, providing both 32-bit and 64-bit monitoring and

long-term statistics collection. Dell Networking OS RMON supports the following RMON groups, as

defined in RFC-2819, RFC-3273, RFC-3434, and RFC-4502:

• Ethernet Statistics Table; RFC-2819

• Ethernet Statistics High-Capacity Table; RFC-3273, 64bits

• Ethernet History Control Table; RFC-2819

• Ethernet History Table; RFC-2819

• Ethernet History High-Capacity Table; RFC-3273, 64bits

• Alarm Table; RFC-2819

• High-Capacity Alarm Table (64bits); RFC-3434, 64bits

• Event Table; RFC-2819

• Log Table; RFC-2819

• User History; RFC-4502

• Probe Configuration (Capabilities, SoftwareRev, HardwareRev, DateTime and ResetControl);

RFC-4502

Dell Networking OS RMON does not support the following statistics:

• etherStatsCollisions

• etherHistoryCollisions

• etherHistoryUtilization

NOTE: Only SNMP GET/GETNEXT access is supported. Configure RMON using the RMON

commands. Collected data is lost during a chassis reboot.

rmon alarm

Set an alarm on any MIB object.

Syntax

rmon alarm number variable interval {delta | absolute} rising-

threshold value event-number falling-threshold value event-

number [owner string]

1494

Remote Monitoring (RMON)