CLI Guide

Command Modes CONFIGURATION INTERFACE (config-if)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
Syntax
rmon event number [log] [trap community] [description string]
To disable RMON on an interface, use the no rmon event number command.
Parameters
number Assign an event number in integer format. The range is from
1 to 65535. You must ensure that the value you enter is
unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON
event log. This option sets the eventType to either log or
log-and-snmptrap in the RMON event table. The default is
None.
trap community (OPTIONAL) Enter the keyword trap followed by the SNMP
community string to generate SNMP traps for an RMON
event entry. This option sets the eventType to either
snmptrap or log-and-snmptrap in the RMON event table. In
1498
Remote Monitoring (RMON)