CLI Guide

Rapid Spanning Tree Protocol (RSTP)

The Dell Networking OS implementation of rapid spanning tree protocol (RSTP) is based on the IEEE

802.1w standard spanning-tree protocol. The RSTP algorithm configures connectivity throughout a

bridged local area network (LAN) that is comprised of LANs interconnected by bridges.

Dell Networking OS supports RSTP.

bridge-priority

Set the bridge priority for RSTP.

Syntax

bridge-priority priority-value

To return to the default value, use the no bridge-priority command.

Parameters

priority-value Enter a number as the bridge priority value in increments of

4096. The range is from 0 to 61440. The default is 32768.

Defaults 32768

Command Modes CONFIGURATION RSTP (conf-rstp)

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

1512

Rapid Spanning Tree Protocol (RSTP)