CLI Guide

Dell(conf-radius-group)#radius-server vrf default
radius-server key
Configure a key for all RADIUS communications between the switch and the RADIUS host server.
Syntax
radius-server key [encryption-type] key
To delete a password, use the no radius-server key command.
Parameters
encryption-type (OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the
switch and RADIUS servers. It can be up to 42 characters
long.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
1568
Security