CLI Guide

Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information You can associate a TACACS server group with a VRF.
Example
Dell(conf)# tacacs-server group group1
Dell(conf-tacacs-group)# tacacs-server host 1.1.1.1 key secret
Dell(conf-tacacs-group)# tacacs-server host 2.2.2.2 key secret
Dell(conf-tacacs-group)# tacacs-server vrf vrf1 source-
interface gigabitethernet 1/40
Dell(conf-tacacs-group)# show config
!
tacacs-server group group1
tacacs-server vrf vrf1 source-interface GigabitEthernet 1/40
tacacs-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41
tacacs-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41
Dell(conf-tacacs-group)#
Related
Commands
• aaa authentication login — specifies the login authentication method.
• tacacs-server key — configures a TACACS+ key for the TACACS server.
tacacs-server host
Specify a TACACS+ host.
Syntax
tacacs-server host {hostname | ipv4-address | ipv6-address}
[port number] [timeout seconds] [key key]
Parameters
hostname Enter the name of the TACACS+ server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X)
of the TACACS+ server host.
port number (OPTIONAL) Enter the keyword port then a number as the
port to be used by the TACACS+ server. The range is from
zero (0) to 65535. The default is 49.
timeout seconds (OPTIONAL) Enter the keyword timeout then the number
of seconds the switch waits for a reply from the TACACS+
1574
Security