CLI Guide

NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is
enabled by default.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related
Commands
• show ip ssh — displays the ssh information.
ip ssh server vrf
Configure an SSH server on either a specific VRF or a management VRF.
Syntax
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
ip ssh server vrf {management | vrf-name}
To disable the SSH server configuration, use the no ip ssh server vrf
{management | vrf-name} command.
Parameters
vrf management Enter the keyword vrf followed by the keyword
management to configure an SSH server on a management
VRF.
vrf vrf-name Enter the keyword vrf followed by the VRF name to
configure an SSH server on that VRF.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S-Series and Z9000.
1608
Security