CLI Guide

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.3.1.0 Added the members option.

Usage Information Enabling this command keeps the failed switch in the Failed state. The switch does

not reboot until it is manually rebooted. When enabled, it is not displayed in the

running-config. When disabled, it is displayed in the running-config.

Commands

show redundancy — displays the current redundancy status.

redundancy force-failover stack-unit

Force the standby unit in the stack to become the management unit.

Syntax

redundancy force-failover stack-unit

Parameters

stack-unit Enter the stack unit. The range is from 1 to 6.

Defaults Not enabled.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.