CLI Guide

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Commands

• reload – reboot the Dell Networking OS.

• show system (S-Series and Z-Series) – display the status of all stack members

or a specific member.

upgrade system stack-unit

Copy the boot image or Dell Networking OS from the management unit to one or more stack members.

Syntax

upgrade {boot | system} stack-unit {all | stack-unit-number | A

| B}

Parameters

boot Enter the keyword boot to copy the boot image from the

management unit to the designated stack members.

system Enter the keyword system to copy the Dell Networking OS

image from the management unit to the designated stack

members.

stack-unit Enter the stack-unit number. The range is from 1 to 6.

all Enter the keyword all to copy the designated image to all

stack members.

A Enter the keyword A to upgrade all stacked units in System A

( only).

B Enter the keyword B to upgrade all stacked units in System B

( only).

Defaults none

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

1722

Stacking