CLI Guide

Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information The number parameter in the ntp trusted-key command must be the same
number as the number parameter in the ntp authentication-key command. If
you change the
ntp authentication-key command, you must also change the
ntp trusted-key command.
Related
Commands
• ntp authentication-key — sets an authentication key for NTP.
• ntp authenticate — enables the NTP authentication parameters you set.
show clock
Display the current clock settings.
Syntax
show clock [detail]
Parameters
detail (OPTIONAL) Enter the keyword detail to view the source
information of the clock.
Command Modes
• EXEC
• EXEC Privilege
1764
System Time and Date