CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1811

• CONFIGURATION mode

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, and Z9500.

Usage Information To export all the routes corresponding to a source VRF, use the ip route-

export tag command without specifying the route-map attribute. This action

exposes source VRF routes to other VRFs, which then import these routes using the

ip route-import tag command.

In Dell Networking OS, you can configure one route-export per VRF as you can

only expose one set of routes for leaking. However, you can configure multiple

route-import targets because a VRF can accept routes from multiple VRFs.

You can expose a unique set of routes from the source VRF for leaking to other

VRFs. When two VRFs leak or export routes, there is no option to discretely filter

leaked routes from each source VRF. For example, you cannot import one set of

routes from one VRF and another set of routes from another VRF.

Only active routes are eligible for leaking. For example, if one VRF has two routes

corresponding to BGP and OSPF, in which the BGP route is not active, the OSPF

route takes precedence over BGP. Even though the target VRF has specified

filtering options to match BGP, the BGP route is not leaked as that route is not

active in the source VRF.

Commands

• ipv6 route-import – imports IPv6 routes from another VRF.

ipv6 route-import

Imports IPv6 routes that another VRF leaks using the tag that VRF specifies during export of these routes.

Syntax

ipv6 route-import tag [route-map-name]

Parameters

route-import Enter the keywords route-import to import IPv6 routes

into the VRF.

tag Enter a tag (ASN number) to specify an import route target

for importing routes from another VRF. To import leaked

1812

Virtual Routing and Forwarding (VRF)