CLI Guide

Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway lldp
Dell(conf-vlt-domain)#
proxy-gateway static
Enables the proxy-gateway feature using static configurations.
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When you add a proxy-gateway static configuration, the setting is saved in the
Layer 2 module. When you remove the static proxy gateway configuration, each
proxy-gateway static MAC configured is deleted from the Layer 2 module.
Example
Dell(conf)# vlt-domain 1
Dell(conf-vlt-domain)# proxy-gateway static
Dell(conf-vlt-domain)#
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
1820
VLT Proxy Gateway